Easy upgrade with more features doubles aquarium LED control. Current USA Dual Ramp Timer offers a simple and budget-friendly way to add more high-end features to your existing LED fixtures. Fully programmable dual-channel LED controller with wireless IR (infrared) remote puts you in control over two LED light fixtures. Enjoy 24-hour LED aquarium lighting control with gradual ramp-up and dim-down feature PLUS LED intensity and color control!
Current USA Dual Ramp Timer is an easy to install and program dual-channel timer featuring 24-hour LED aquarium lighting control with two modes: ON/OFF with a 15-minute ramp up and dim down sequence or instant ON/OFF (no fade). Gradual ramp-up and dim-down feature simulates a natural sunrise and sunset each day to prevent stressful light shock experienced when aquariums transition from complete darkness to full brightness. Manual button allows you to turn your lights on or off instantly.
Current USA Dual Ramp Timer includes a wireless IR (infrared) remote that puts LED control in the palm of your hands. Program your Dual Ramp Timer or adjust LED intensity and color from the comfort of your couch. Connect an actinic blue LED fixture to one channel and set at minimum intensity for use as moonlight at night. Or adjust intensity of your actinic blue LED fixture during daytime to achieve your ideal color temperature. LCD display with simple touch screen keypad allows hassle-free operation. Internal memory stores your pre-programmed times in the event of a power failure. Current USA Dual Ramp Timer measures 3.15" x 0.5" x 2.0" high.
- Voltage: 12-24VDC
- Max. Wattage per Channel: 24 watts @ 12VDC / 48 watts @ 24VDC
- Max. Wattage per Channel: 48 watts @ 12VDC / 96 watts @ 24VDC
- Dimensions: 3.15" x 0.5" x 2.0" high
- Cable Length: 6"
- Dimming Type: PWM
- Connector: DC Plug 2.5mm x 5mm
- Channels: 2
Shop all Aquarium Lighting Products.
Frequently Asked Questions
Q. Can I use the Ramp Timer with my lunar moonlight?
A. Yes, simply plug the 12VDC transformer into the timer and link your lunar lights to the output.
Q. Can I use an Inline Dimmer with my Ramp Timer?
A. Yes, but only in the simple on/off mode (no ramp or dimming). Using two of any PWM dimmers can cause a conflict and may cause the LED light to blink. If your light begins to flash or blink, simply place the timer in non-dimming mode or at least at a non ramp/dim time and the light will operate normally.
Q. Can I plug in multiple LED lights to one timer?
A. Yes, as long as you do not exceed 48-watts at 24VDC or 24-watts at 12VDC total per channel.
>Q. Can I plug in a two or three way splitter into a timer?
A. Yes, Current USA splitters are completely compatible with the Ramp Timer.
Q. Can I adjust the Ramp Up and Dim Down time?
A. The Ramp Timer is designed with a built-in 15-minute ramp up and dim down time so no further adjustment is required.
Q. If the power goes out will the timer remember my settings?
A. Yes, the Ramp Timer has an internal memory, which will store your setting.
Q. Does the timer require a battery?
A. No, it does not require a battery or battery replacement.
Q. Is the Ramp Timer water resistant or waterproof?
A. No, please ensure the timer does not get wet and is not located near moisture or salt creep.
Q. Can I use the Ramp Timer with other brand LED lights?
A. Yes, any 12 or 24VDC light up to 48-watts (per channel) using a 2.5mm x 5mm barrel connector is compatible. Check with your LED lighting manufacturer for any warranty information.
Q. Can I plug more than one power supply into the Ramp Timer?
A. No, doing so will damage the power supply and exceed the voltage limits.