Enjoy high-end LED control with minimal effort. Current USA Single Ramp Timer easily upgrades your LED light fixture with a gradual ramp-up and dim-down feature found in high-end LED fixtures. Aquarium lighting connected to the Current USA Single Ramp Timer simulates a gradual sunrise and sunset each day to prevent stressful light shock experienced when aquariums transition from complete darkness to full brightness.
Current USA Single Ramp Timer is an easy to install and program single-channel timer featuring 24-hour LED aquarium lighting control with two modes: ON/OFF with a 15-minute ramp up and dim down sequence or instant ON/OFF (no fade). A manual button even allows you to turn your lights on or off instantly. Large LCD display with simple push button keypad allows hassle-free operation that easy on your eyes. Internal memory stores your pre-programmed times in the event of a power failure. Current USA Single Ramp Timer measures 3.25" x 0.75" x 2.25" high.
- Voltage: 12-24VDC
- Max. Wattage: 84 watts @ 24VDC / 42 watts @ 12VDC
- Dimensions: 3.25" x 0.75" x 2.25" high
- Cable Length: 6"
- Dimming Type: PWM
- Connector: DC Plug 2.5mm x 5mm
- Channels: 1
Single Ramp Timer Instruction PDF.
(Requires Adobe Acrobat Reader 4.0 or later -
get it here for free)
Downloadable Current USA Single Ramp Timer Instructions PDF.
(Requires Adobe Acrobat Reader 4.0 or later - get it here for free)
Shop all Aquarium Lighting Products.
Frequently Asked Questions
Q. Can I use the Ramp Timer with my lunar moonlight?
A. Yes, simply plug the 12VDC transformer into the timer and link your lunar lights to the output.
Q. Can I use an Inline Dimmer with my Ramp Timer?
A. Yes, but only in the simple on/off mode (no ramp or dimming). Using two of any PWM dimmers can cause a conflict and may cause the LED light to blink. If your light begins to flash or blink, simply place the timer in non-dimming mode or at least at a non ramp/dim time and the light will operate normally.
Q. Can I plug in multiple LED lights to one timer?
A. Yes, as long as you do not exceed 84-watts at 24VDC or 42-watts at 12VDC total.
Q. Can I plug in a two or three way splitter into a timer?
A. Yes, Current USA splitters are completely compatible with the Ramp Timer.
Q. Can I adjust the Ramp Up and Dim Down time?
A. The Ramp Timer is designed with a built-in 15-minute ramp up and dim down time so no further adjustment is required.
Q. If the power goes out will the timer remember my settings?
A. Yes, the Ramp Timer has an internal memory, which will store your setting.
Q. Does the timer require a battery?
A. No, it does not require a battery or battery replacement.
Q. Is the Ramp Timer water resistant or waterproof?
A. No, please ensure the timer does not get wet and is not located near moisture or salt creep.
Q. Can I use the Ramp Timer with other brand LED lights?
A. Yes, any 12 or 24VDC light up to 84-watts using a 2.5mm x 5mm barrel connector is compatible. Check with your LED lighting manufacturer for any warranty information.
Q. Can I plug more than one power supply into the Ramp Timer?
A. No, doing so will damage the power supply and exceed the voltage limits.