With Lee's AQ2 Aquarium Divider System, you can easily create separate compartments in your aquarium. Use one or more Dividers to protect injured fish or young fish (fry), create a safe breeding area, and/or provide secluded quarters for aggressive fish.
Lee's AQ2 Aquarium Divider System features a clear plastic divider screen that maintains overall heat circulation and unobstructed filtration throughout your aquarium. Plus, it is designed to provide minimal visual obstruction in your overall aquarium setup. If necessary, you can easily cut down the Aquarium Divider System to fit other aquarium sizes.
Each Lee's AQ2 Aquarium Divider System includes: 1 clear plastic divider screen, 2 black plastic side rails, 2 black plastic finishing strips, and 2 silver-tone metal clips.
dimensions up to
|10-3/8" x 11-3/8"
||10-3/8" x 12-3/8"
|12" x 12"
||15-20 gal aquariums
||12-1/8" x 12-3/8"
|12" x 16"
||12-1/8" x 16.5"
|12" x 18"
||29-gal - 55-gal
|12-1/8" x 18.5
|17" x 16"
aquariums - 60-gal
|17-7/16" x 15-3/4"
Aquarium Isolation Units/Dividers.
- Insert the long edges of the ventilated Screen Divider into the Rails on both the right and left sides.
- Slide the Finishing Strips into place on top and bottom of the Screen Divider.
- Turning the assembly at a slight angle, place it in the aquarium. Straighten the Screen so it is parallel with the ends of the aquarium. The top of the Rails should fit snugly under the inside lip of the aquarium frame at the top. NOTE: The Divider Screen should be tight against the aquarium walls and extend into the gravel to create a solid partition.
- Pry open one of the Clips. Hook the curved end over the frame of the aquarium and insert the straight end of the Clip into the hole in the top of the Rail. Push down as far as it will go to secure the Clip. Repeat on the opposite side.
For larger and stronger fish, you may need to use aquarium silicone sealant (item #114810) to secure the divider screen to the side rails.