Flexible dog gate bends to secure openings 76" wide
The ideal gate for off-set or irregular openings
Features convenient walk-through gate with small pet door for cats
Tubular steel construction with screw-mount hardware adds security
Enclose large openings, even irregular shapes, while still allowing you and your smaller pets convenient access. Tubular steel panels feature screw-tight tension hinges and stretch to close openings 76" wide. This gate features two swing-open access doors: a large door for you, and a small door for your cat or small dog. Walk-through access door swings open in one direction and secures with an adult-operated spring-loaded latch. Small pet access door swings open in both directions and closes with a spring-tension pin. Screw-mount hardware affords simple, fast and secure set-up. Each panel features 2-5/8" bar spacing. Extra Tall version secures equally large openings but stands 38" tall to safely contain the largest of dog breeds. Available in white only.
Access Door Size
Pet Door Size
Extra Tall Flexi**
24" w x 38" h
17.5" w x 36.5" h
7" w x 10" h
**Please Note: The Flexi Gate consists of three panels: an even door panel flanked by two odd panels. Odd panels can only connect to even panels, and even panels can only connect to odd panels.
Measure the opening you would like to secure.
If necessary, add individual panels to create a gate of sufficient length.
First, unscrew the Screw-tight Tension Hinge on the end Panel.
Fit the Screw-tight Tension Hinge on each of the Extensions (sold separately) and the Gate.
Tighten each Hinge together via the Screw-tight Pin.
Place the Gate in the desired opening.
With a Pencil, mark the approximate height of each end Panel's Gate Mounting Tabs.
Remove the Gate from the opening.
Hold one Mounting Plate against the previously made pencil mark.
With a Pencil, mark each of the three Screw Holes.
Repeat Steps #6 and 7 for the second Mounting Plate.
With a Hand or Electric Drill, drill a small pilot hole for each of the six screw locations.
Using a Phillips Screwdriver and the included Metal Screws, affix each Mounting Plate to each side of the desired opening.
Once secure, reposition the Gate in the opening.
Slightly lift each Gate end to align the Plastic Tabs on the end Panel with the Notch on the Mounting Plate.
Once aligned, firmly press downward on the Gate to secure the end Panel to the Mounting Plate.
Cleaning Your Flexi-Gate
If necessary, hand-wash your gate with soft, wet cloth and a mild soap. Ensure the gate is thoroughly rinsed and towel or air dried before returning to your pet's environment.
As every pet owner knows, certain times and situations require that you safely contain your pet. Choosing the right product for your pet and your needs helps ensure your pet's safety and well-being when contained.
FREE economy ground shipping to 48 connecting states only on orders $19 or more. FREE economy ground shipping - NO MINIMUM - on any order containing Prescription or Flea and Tick products. See
full shipping rates here.