Instant phosphate remover for "dose and forget" phosphate management. Patent-pending PhosBuster Pro rapidly removes aquarium phosphate in minutes, not days! Each easy-to-dispense treatment removes 1.0 ppm of phosphate from aquarium water for a clearer, healthier tank environment. Simply dose in the sump, near a powerhead outlet, or any high flow area of the system - No more fiddling with filter bags or phosphate reactors. PhosBuster Pro can be used monthly for preventive maintenance in fresh or saltwater aquariums.
Add one capful for every 10 gallons. 8 oz treats 472 gallons.
Phosphate Control products for aquariums.
Add 1 capful (5ml) of PhosBuster Pro per 10 gallons of aquarium water. Place in the sump, near a powerhead outlet, or any high flow area of the system for rapid dispersal. Some temporary cloudiness will appear. Desired results should be achieved within 72 hours depending upon level of phosphates in the system. Keep all filters running during this time period then rinse or replace filter media. Retest water for phosphates and repeat treatment as needed. Each treatment will remove 1.0 ppm from aquarium water. PhosBuster Pro may be used monthly as part of a preventative maintenance program. Maintenance dose 1 capful (5ml) per 20 gallons.
Do not use in low hardness freshwater systems (for example, soft water Discus tanks). Before using PhosBuster Pro in a marine aquarium, measure pH (must be at least 8.2) and alkalinity (must be at least 3.5 meq/l or 10dkh). Measure phosphate before using, and do not use if levels are below 0.1 ppm, or if phosphate levels do not need to be below 0.1 ppm for tank occupants. If phosphate is over 5ppm, use half a dose, and add the second half dose at least 24 hours later. If large amounts of green algae are present, remove as much as possible before adding PhosBuster Pro. Use PhosBuster Pro near the end of your light cycle.