So many features, you'll quickly see why this feeder is "super". Three large seed tubes let you offer three different varieties of seed. Each feed tube has 3 squirrel-resistant plastic feeding ports with perches (9 total). Feeder includes three plastic nyjer feeding ports, too, so you can convert one of the feeding tubes into a nyjer feeder simply by swapping out the three ports on that tube.
This feeder can be hung or pole mounted. A 6-ft aluminum pole (1-1/4" dia) is included, as well as a hanging adaptor. A 16" squirrel baffle covers the entire feeder, to keep out thieving squirrels and protect the seed from the elements. To remove the baffle, simply unsnap it from the feeder lid.
The plastic feeder lid is also unique. It features a pour spout that is normally covered by the baffle. When you want to fill the feeder, however, you simply lift off the baffle and rotate the lid so that the spout rests over the top of one of the seed tubes. Then, simply pour seed into that tube. The spout has a generous 2-1/4" diameter for easy, mess-free filling.
The large plastic basin lets larger birds like cardinals perch effortlessly and includes drain holes to keep the seed fresh. Feeder comes fully assembled.
Holds approximately 9 quarts seed (about 3 quarts each tube). 16" dia x 22" high.
(additional parts included with the assembled feeder)
Filling the Super Feeder
- Pole Mounting Adaptor
- Baffle Cap
- Baffle Hanging Adaptor
- S-Hook (for hanging)
- 1-1/4" Pole Sections (4 sections total - total length of 6 ft)
- Squirrel Baffle Top
- 3 plastic nyjer seed ports (swap out 3 metal ports to fill one tube with nyjer seed)
To fill your Super Feeder, remove the feeder from the pole or hanging position and place it in the upright position. Remove the seed baffle by releasing the two clips on the underside of the baffle. The cover plate of the feeder rotates to expose openings into the top of the feeder tubes. Note that the cover plate does not rotate 360 degrees. You should not have to force the cover to rotate. If you can't rotate it in one direction, you have reached a built-in stop. To gain access to the other tube openings, rotate it in an opposite direction if you have to. The cover has built-in stops so that it will temporarily lock into place when the funnel portion of the cover is directly over a feeder tube.
Your Super Feeder SHOULD NOT BE DISASSEMBLED. It has been assembled at the factory with the use of special fixturing. Re-assembly without the aid of this fixturing can be very difficult. To clean, align the funnel cover over a seed tube, and insert a garden hose and rinse the tube clean. Dry thoroughly before refilling.