Classic style, superior quality, and premium features make the Living Room Series Critter Home the ultimate in small pet comfort, safety, and convenience. Spacious abode offers four levels of fun for a ferret, chinchilla, or a large rat to explore, featuring movable shelves and sure-grip ramps to customize your small pet's living experience. Solid surface shelves and plastic ramps are easy to clean, prevent falls, and provide safe access to every level. Two large fold down front doors make care and cleaning quick and easy. This home even includes a hanging hammock sleeper for cozy naps after playtime! Heavy-duty tubular steel construction plus extra strong welded wire is built strong to last long, and the durable metallic hammertone finish is baked on to resist wear. E-Z roll casters provide mobility around the house, perfect for bonding with your pet. Durable stain- and odor-resistant full size plastic pull pan makes clean-up easy. Cage sets up easy - simply tighten bolts to assemble (includes free wrench). Safe and secure 1/2" wire spacing. 20.5" L: x 20.5" W x 44.75" H.
Critter home Includes:
3 full width shelves
3 sure grip ramps
2 locking doors
4 E-Z roll casters
Please click "More Information" for Assembly Instructions.
Connect the Bottom Back Wire and the Bottom Front Wire to the Side Wire with the tracks facing up and towards the inside of the cage. Tip: Do not fully tighten bolts until all panels are in place.
Insert the Casters into the Bottom Front and Back Wires, then connect both by screwing in bolts on each side. Place the locking casters in the holes at the cage front. Flip the cage so the wheels are on the ground. Tip: The tabs on the support bars should be facing towards the outside.
Add the Top Back Wire and Top Front Wire to the lower portion of the cage by inserting each panel into the slots provided. Then screw in the top bolts into the Lower Side Panels to connect upper and lower wires. Note: Make sure that the panels with the doors are placed on the same side.
Connect the Side Wires to the Top Back and Front Wires using 4 bolts for each Side Panel.
Lower the Top Wire into place and attach with bolts on each corner. Tighten all bolts used in previous steps.
Slide the Plastic Pull Pan into the slots located on the lower panels.
Connect the ramps to the bottom of the shelves (as shown in assembly image).
Place assembled shelves and ramps in the cage through the doors.
Next, attach the top shelf with a Short Ramp to the 14th bar up from the center bar at the back of the cage.
Then, attach the middle shelf with a Short Ramp to the 3rd wire down from the center bar in the front.
Attach the lowest shelf with a Long Ramp to the 15th bar up from the bottom on the lower Side Panels at the back of the cage.
Assembly is now complete!