High volume pumps, great for central filtration systems
The pump's extra large strainer pot has a comfort grip lid for quick access to the strainer basket. Each motor includes a stainless steel shaft. The seal plate with integral diffuser and enclosed glass-filled thermoplastic impeller provide superior strength, corrosion resistance and excellent performance. UL- and CSA-Listed. For longer life in saltwater applications, we recommend the optional saltwater shaft seal (sold below). Note: Self-priming pumps need to be hard-wired and do not include power cord.
Using an in-line pump with a wet/dry filtration system: Water flows via gravity from the aquarium into the wet/dry filter, and then into the filter's sump. From the sump, it flows into the pump via gravity through a bulkhead installed in the side of the sump. The pump sends water back up into aquarium from the wet/dry filter's sump. When installing pumps with wet/dry filtration, you'll need to drill into the filter's sump to install the bulkhead, then mount the pump level to the bottom of the filter's sump. You need to siphon water into the pump before turning it on.
Using an in-line pump with canister filtration: Water moves via gravity from the aquarium into the pump. The pump pushes the water through the canister filters, and back up into the aquarium (or UV filter, chiller, etc.). You need to siphon water from the aquarium and flood the pump before turning it on.
Never restrict the inlet flow of any water pump. This will quickly cause permanent motor damage.
You can restrict the outlet flow of the water pump with a ball valve in order to achieve the desired flow rate.
Use ball valves before inlet and after outlet to make pump removal easy and spill free.
Anytime a threaded connection is used, be sure to use Teflon tape. When using barb insert connections to flexible tubing, use hose clamps. (Plastic hose clamps are required for underwater use.)
Remove filter from the front of submerged pumps and remove debris. Rinse with plain fresh water (no soap).
Remove the impeller housing cover to expose the impeller.
Remove the impeller and the magnet. Inspect them for damage and wash with plain fresh water (no soap or abrasives).
Wash out the impeller housing with plain fresh water (no soap or abrasives).
Reassemble the pump and re-install it in your system.
Other Cleaning Tips:
Some brands of in-line pumps require periodic oiling to lubricate the motor. Always refer to your owner's manual for instructions on this procedure.
If you have lime or mineral buildup on any part of your pump, you can dissolve these with Lime Off, a product especially designed for removing lime, salt residue, and other hard deposits on aquarium equipment. Make sure to rinse thoroughly with fresh clean water before reassembling your pump.
When choosing a water pump type and size, there are several factors to include in your decision. Filtration type, desired flow rate, plumbing and head height, and adding additional devices all come into play. This article helps clear the confusion.
Your primary objective is to maintain a healthy thriving aquatic environment for your underwater plants and animals. To achieve this goal, one of the most critical decisions you'll make is choosing the right pump. Compare pumps here.
FREE economy ground shipping to 48 connecting states only on orders $19 or more. FREE economy ground shipping - NO MINIMUM - on any order containing Prescription or Flea and Tick products. See
full shipping rates here.