Easy-to-use full-range pocket pH tester at an exceptional value. Priced right for any budget, Milwaukee Instruments pH 600 Hand Held pH Pocket Tester offers hobbyists an affordable introduction to electronic testers as well as a great time-saving alternative to liquid pH test kits. Economical electronic pH tester offers quick and reliable results measuring 0.0 to 14.0 pH with a 0.1 resolution.
Milwaukee Instruments pH 600 Hand Held pH Pocket Tester includes pH Tester, Calibration Screwdriver, 20ml pH 7.01 Calibration Solution, and a convenient plastic carrying case.
|| 0.0 to 14.0 pH
|| 0.1 pH
|| ±0.1 pH
||Manual 1-point (7.0)
|| 0 to 50°C, 95% RH max.
|| 700 hours of use
||1.5V Button - 3 Included
||1-1/8" x 5/8"x 5-3/4" high
Additional Calibration Solution, Rinse Solutions and Storage Solution available here.
Shop all Aquarium Controllers and Monitors.
The calibration procedure is very simple and fast.
- Remove the Black Cap and set it aside.
- Place unit in one inch of bottled water in a cup or jar for 30-minute pre-calibration soak.
- After 30 minute pre-soak, immerse the Tester into Calibration Solution 7.01.
- Allow the reading to stabilize, and using the small screwdriver provided, turn the Calibration Trimmer on the back of the unit it change the LCD screen display to read "7.0."
- You are now calibrated.
PLEASE NOTE: Always keep the unit stored in water, using a cup or jar. Never let this probe dry out.