Sonic Disc Replacement Instructions
Replacement Kit comes with (1) Spanner Screwdriver and (1) new Sonic Disc.
To replace Ultrasonic element with new sonic disc.
STEP 1: Disconnect AC Adapter from outlet box.
STEP 2: Unscrew removable nut using Spanner Screwdriver.
STEP 3: Remove and replace the Sonic Disc making sure the striped side is facing down.
STEP 4: Position removable nut over the Sonic Disc and fasten firmly.
STEP 5: Reconnect AC Adapter to outlet box.
General Information
Single Ultrasonic Fogger
- Ultrasonic technology creates mysterious fog.
- For use in any water display - simply place in position and plug in.
For maximum enjoyment of your fogger, there are a couple of details, which needs attention:
- The fogger must be positioned near the surface of the water (1" to 1-1/2" below the water surface) for best performance.
- The fogger must be positioned with the Sonic Disc facing the surface of the water.
Features:
- The single ultrasonic fogger is equipped with an automatic shut-off for low water situations.
- If the water is not covering the sensor completely, the unit will shut off. This protects the fogger from burning out.
- The fogger is supplied with a low-voltage transformer.
Note: For safety purposes, avoid touching the surface of the disc while in operation, Should mineral deposits form on the fogger unit the performance will be affected. Mineral deposits can be removed with household vinegar. | 
 "Ultrasonic Disc Foggers")
