EasyPro Eco-Series Prelude Skimmer

In-pond skimmer boasts patented design for professional results with greater ease. EasyPro Eco-Series Prelude Skimmer is the ready-to-install unit that sits on top of the pond liner. Streamlined installation eliminates the need to cut the liner or use adhesives and bolts to secure liner to the skimmer. No cutting means no chance of leaks!

Eco-Series Prelude Skimmer is loaded with convenient features making it a great choice for do-it-yourself pond owners. Rugged, strong-ribbed skimmer holds shape perfectly even when backfilled with dirt. Floating weir door accommodates fluctuations in water level while debris basket captures leaves and large pond debris. Filter Mat provides fine mechanical filtration to capture unsightly particles and prevent pump damage. Skimmer comes complete with molded Debris Basket, Filter Pad and Lid.

EasyPro Eco-Series Prelude Skimmer measures 18" x 15" x 13" high and is rated for maximum flow rate of 1,800 gph. 5" water inlet (weir door opening).

Requires submersible pump (1,800 gph max) and return line plumbing for pump outlet, each sold separately

Downloadable Eco-Series Prelude Skimmer Instructions PDF.
(Requires Adobe Acrobat Reader 4.0 or later - get it here for free)

Shop all Pond Skimmers.

Please click on "More Information" for installation instructions.

• Layout the pond. Position the Skimmer opposite your waterfall for best skimming action, preferably in a corner where there will be extra liner.
• Dig a pocket (or ledge) for the Skimmer on the edge of the Pond. Over dig the pocket by at least 4" in all directions to ensure plenty of room for the Skimmer.
• Make sure the ledge is level in all directions. Establish the water level for the pond and then establish the proper placement and height for the Skimmer.
• The Skimmer should be set so the ideal water level is one inch below the top of the Skimmer Face Plate Window. The distance between the ledge and the Skimmer Face Plate Window should be 11-1/2". This allows for water fluctuations.

Step Two - Installing Liner and Underlayment

• Before installing the Underlayment, be sure to check over the pond bottom really well to get rid of any sharp rocks, sticks or any object that could puncture the Liner.
• Carefully install the Protective Underlayment. Work the wrinkles out of the bottom of the pond. Lay folds flat against the side wall. Repeat for the Liner. Again, work the wrinkles out of the pond floor. Lay the Liner neatly in the pocket for the Skimmer.

Step Three - Installing the Skimmer

• Set the Eco-Series Skimmer in the pocket. Double check to makes sure it is level in all directions.
• Stack a few stones up the front of the Skimmer to lock it in place and prevent movement during the backfill process.
• Fold the Liner and Underlayment back towards the pond to reveal the void spaces created when digging the Skimmer pocket. Backfill around the Skimmer with soil in four inch to six-inch increments. Compact the soil around the Skimmer using the end of the shovel or a 2x4.

Step Four - Finishing Up

• Finish stacking stones up the front of the Skimmer. Place the stones on the horizontal ledge to help lock in the Skimmer. Use stones to conceal the Skimmer Door Opening.
• Hook up the check valve assembly to the pump and install the pump in the Skimmer. Hook up the flexible pipe to the check valve assembly. Install the Filter Mat Divider and the Leaf Basket into the Skimmer. Plug the pump into a GFCI protected outlet. Place the cover on top and enjoy.

General Information

How it Works
Pond maintenance begins and ends at the skimmer. 90% of debris is windblown or falls from trees.

Capturing surface debris before it becomes water logged and settles to the bottom of the pond lessens clean-outs, eliminates decomposing matter, lightens the load on your biological filter, keeps pond water clearer and prevents discolored water. A Surface Skimmer helps eliminate areas where diseases, anaerobic bacteria and pathogens thrive.

Skimmer Maintenance

• Shut off pump prior to cleaning Skimmer. Remove the cover to expose the area to clean out.
• Empty the Leaf Basket on a weekly basis, more often if needed. In the fall, the Skimmer may need to be cleaned daily. Leaf Basket must stay clean to allow water into pump to prevent overheating the pump.
• Spray out the Leaf Basket with water to get rid of decomposed material.
• Slowly lift out the Filter Mat. Do this slowly and carefully to retain the most debris in the mat.
• Spray off the Filter Mat. Do not rinse 100% clean to keep some of the beneficial bacteria on the mat.
• Add a maintenance dose of bacterial additive to help seed the Filter Mat.