Little Giant Solar LED EggLite Kit

Free yourself from operating costs with solar-powered LED (Light Emitting Diode) pond lights. Little Giant Solar LED EggLite Kit employs the latest energy-efficient technologies so you can save more without compromising pond lighting options. Versatile pond lighting kit gives you the freedom to accent waterfalls, fountains, and landscaping with easy-to-install Solar LED EggLites. Use lights in or out of water to illuminate any dark areas of your pond landscape. Auto ON/OFF photocell feature illuminates your pond from dusk till dawn.

Expandable Little Giant Solar LED EggLite Kit includes a weather-resistant solar panel with lithium polymer battery so you can enjoy up to 20 hours run time. 10 ft power cord with 3-way outlet ensures secure, water-tight connection. Kit comes with 2 fully-submersible white LED EggLites with 16" positionable pliable cord. Install up to four more LED EggLites for a total of six LED EggLites with Add-on EggLites, available in four colors, and additional EggLite cords each sold separately.

Please click on "More Information" for Assembly, Installation, and Maintenance instructions.

Assembly
Your Solar LED EggLite kit comes fully assembled with the following items:

• Solar panel with 6-inch cord
• Two white LED EggLites
• 10-foot extension cord with three-way connector
• Stake extension
• Spare O-ring

1. To ensure a waterproof connection, place an O-ring onto each light plug.
2. Insert each of the two light plugs into a receptacle on the three-way splitter and then tighten the connectors. (NOTE: Align the flat sides on the plugs and the receptacles for proper polarization. If plugs are not inserted correctly, the lights will not illuminate.)
3. Connect additional lights (sold separately) to the third receptacle on the three-way connector.
4. Connect one end of the extension cord to the short cord of the solar panel. Connect the opposite end to the three-way connector. (Note: Ensure that the flat sides on the plugs are aligned for proper polarization.)
5. Attach extension to ground stake.
6. Slide the MODE switch to the RUN position. This will automatically turn the lights off during the day so that the battery can recharge. It will also turn the lights on during the night to illuminate your landscape. (NOTE: For the automatic on/off switching to work properly, ensure the photocell is not covered and is always exposed to ambient light.)
7. Your LED EggLites should now be fully functional. The lights should turn on with the solar panel in a mostly dark room, and turn off when the room is well lit.

Installation and Operation

1. Consider the following to determine the best location for your solar LED EggLites:
   • The lights can be used dry or submerged in your water feature. The solar panel should not be submerged, but can withstand rainy, outdoor environments.
   • Each light comes with a 16-inch pliable cord that can be formed to stand on its own or coiled around foliage and fountainheads in the landscape.
   • Choose a location for the solar panel that maximizes its exposure to the sun. Locate the solar panel so that its surface is mostly perpendicular to the sun's rays throughout the day.
   • The solar panel can be secured using one of two methods.
   • Ground Stake: Use the attached ground stake to secure the panel into the ground of the landscape. To adjust the orientation of the panel to the sun, loosen the stake screw, pivot the panel to the desired orientation, then tighten the screw.
   • Frame Mounting: The solar panel frame has slots that accommodate a variety of mounting methods. Use #6 size wood screws (not included) to secure the panel to a fixed board or post, or use wire (not included) to loop through the slots and secure the panel to a fence or similar item.
   • An optional extension cord (5- or 10-foot) can be purchased to provide greater distance between the EggLites and the three-way connector.

2. Install the pre-assembled lights and solar panel.
3. Check to see that all LED EggLites illuminate when the ambient light turns dark.

Maintenance:

1. BATTERY: Although your kit's battery has a long life, it may eventually need to be replaced. Please follow the instructions below:
   • Loosen the stake screw at the stake pivot point and rotate the stake to allow access to the battery cover.
   • Remove the 2 battery screws from the cover.
   • Remove the battery cover.
   • Remove the battery and disconnect the cable.
   • Connect and install the new battery. Use an authorized replacement battery only (Mfg# 950785).
   • Replace the battery cover and secure it with the 2 cover screws.
   • Rotate the stake back to its original position and tighten the stake screw.
2. PHOTOCELL: For proper operation of the automatic on/off feature, periodically clean the photocell window using a clean, damp cloth.