Corrugated Pond Tubing 3/4" ID x 20 ft
This product is of good quality. The tubing was less expensive than at my local home improvement store.
The tubing is quite pliable and easy to cut and use.
May 10, 2015
I wish this product had...
Good product. Wish it was a little easier to know what size for Pondmaster 1000. Would like to be able just pick rather than measure. Also if they sold it with the screw on nut that attaches to Pondmaster that would be great. That is what I really wanted product for
June 17, 2015
Corrugated pond tubing can be good!
I have been using corrugated tubing for about 6 years now and have had the same problems from can't get it to fit the adapter to splitting. I believe it works better in a cool climate than hot but with a little effort, as I did, you can make this product work. Lets start with getting tubing on your connector, to make tubing a little more flexable, hair dryer or heat gun will do the trick but DON'T OVERHEAT tubing, just get it flexible to slide onto adapter! Problem solved! Now, why does the plastic split, more than likely it is heat! I buried my tubing in the dirt and small pebble rock, which ever I needed to do to keep it from the sun! Doesn't have to be deep or if you have a long straight area you can run it through PVC, splice your tubing from ie, pump or filter so if you have to replace the split tubing you only have a small piece to replace! If you leave your pumps in the cold weather with the tubing connected, the tubing will get brittle in 2-3 yrs. Hope this helps and creates more ideas!
April 21, 2014
Leaked within hours
This review is for the 1-1/4" ID x 20 feet corrugated pond tubing.
Pros: Highly flexible, lightweight.
Cons: Could not take pressure associated with waterfall filter. Lasted for only hours before splitting in a bend in the tubing. Might work if your connection is a straight line or a gentle curve. Replaced with heavyweight 1-1/2" tubing and adapters. All's well.
Thanks to Foster & Smith for prompt refund.
June 15, 2015