Coralife Compact Fluorescent Lunar Aqualight

Be in control of your aquarium lighting needs with this higher intensity compact fluorescent aquarium light fixture. The re-designed Compact Fluorescent Lunar Aqualight with directional LEDs lets you automate all lighting functions for custom 24 hour lighting. Three separate power cords allow independent timer control of included 10,000K, Actinic and LED lamps. Position LEDs over specific areas in your tank for shimmering moonlight effects that add nighttime drama.

Coralife Compact Fluorescent Lunar Aqualight Aquarium Light Fixture features a built-in cooling fan to provide powerful heat management. Sleek, space-saving fixture boasts powder-coated aluminum housing and acrylic splash guard. Aqualight fixture comes with a two-piece adjustable leg set, which measures 6" x 2-1/4" high. Aquarium light fixture is for use over covered aquariums only.

Included 10,000°K Daylight lamp casts sparkling bright white rays and provides high lumen output to simulate the midday tropical sun. Included Actinic Blue light promotes photosynthesis in corals and live plants while enhancing the beauty and vibrant colors of aquarium inhabitants. Straight pin configuration.

Shop all Aquarium Compact Fluorescent Fixtures.

Please click on "More Information" for fixture setup and installation.

Fixture Setup
Mounting Leg Installation

1. Place the fixture on a flat, non-abrasive surface.
2. Remove the Lens Retainers on both ends of the fixture by removing the screws using a crosshead screwdriver.
3. Slide the Mounting Leg Brackets into the Mounting Leg Tracks on the front and back of the fixture. One Mounting Bracket should be inserted on each end of the Lunar Aqualight so that the vertical cornered end of the bracket faces the outside of the light fixture.
4. Replace Lens Retainers on fixture and replace screws.
5. Slide Mounting Legs to each end of the fixture.

Fixture Installation

1. Place clear aquarium cover onto aquarium.
2. Lift and set the fixture on top of the covered aquarium. Position the Mounting Legs so that they lay flush against the side of the aquarium.

Lunar Blue-Moon-Glow LED Connector

1. Locate Lunar-Blue-Moon-Glow LED Connector from fixture.
2. Attach Lunar-Blue-Moon-Glow LED Connector to Lunar-Blue-Moon-Glow LED Adaptor.
   • Important: Make sure that the Lamp Connector is fully seated into the Adaptor Connector.

Grounding and Operation

Grounding Setup
This appliance should be grounded to minimize the possibility of electrical shock. This appliance is equipped with an electrical cord with an equipment grounding conductor and a grounding-type plug. The plug must be plugged into an appropriately grounded outlet. This appliance is for use on a nominal 120-volt circuit and has grounding plug.

Startup Operation
Safety: Make sure fixture with mounting legs is securely positioned on the covered aquarium.
Note: Make sure that all switches are in the OFF position before plugging into a power source.

1. Plug into grounded outlet or power source and turn switches to the ON position.
2. Verify that all lamps are lit and functioning properly.