Andis Power Groom Plus

With up to 5,000 spm, this is the fastest rotary motor clipper we offer. Power Groom Plus is ideal for your toughest grooming jobs, even heavily matted coats. Five motor speeds with touch-button control let you match the clipper speed to your coat's thickness with ease. Lower speeds keep the blade cooler when clipping around sensitive areas, and the higher speeds give you faster all-over body clipping. Features an UltraEdge carburized steel blade for long-lasting, stay-sharp performance and a 4x4 blade drive with 25% more torque than the Power Groom AGC. Its 360º swivel cord prevents tangles, increases user mobility, and reduces hand strain as you clip. Quiet-running, shatter-proof nylon housing has a locking on/off switch. Clipper includes Size 10 Ultra EdgeBlade, 14 ft power cord, and 4 oz clipper oil. Your only maintenance is oiling and cleaning the blades.

SensaCharge charging system and rechargeable battery pack (both sold separately) keep your clippers fully charged. Charges your rechargeable Andis Clipper in one hour or less and will not overcharge. Refresh mode recharges and conditions Battery Pack to maximum performance overnight.

Please click on "More Information" for operating instructions.

Removing the Blade Set
To remove the blade set, make sure your clipper motor is OFF. Push blade release mechanism under blade hinge. While holding down the blade release mechanism, push down on the blade, then gently pull the blade forward and slide it off the blade hinge. If your blade hinge should snap closed and is flush with the clipper, use a small standard screwdriver to pry the tongue of the hinge out. Note: Hair may accumulate in the front cavity of the housing under the blade. If this happens, you can clean out the hair by brushing out the cavity with a small brush or an old toothbrush while the blade is off the clipper.

Changing Blade Set
To replace or change your blade set, slide the blade bracket onto the hinge of the clipper and with the clipper turned ON, push the blade toward the clipper to lock into position.

Care and Servicing of your Andis Clipper Blades
Blades should be oiled before, during and after each use. If your clipper blades have streaks or slow down, it's a sure sign blades need oil. Place a few drops of oil on the front and side of the cutter blades. Wipe excess oil off blades with a soft, dry cloth. Spray lubricants contain insufficient oil for good lubrication, but are an excellent blade coolant. Always replace broken or nicked blades to prevent injury. You can clean excess hair from your blades by using a small brush or worn old toothbrush. To clean the blades, we suggest immersing the blades only into a shallow pan of Andis Clipper Oil, while the clipper is running. Any excess hair and dirt that has accumulated between the blades should come out. After cleaning, turn your clipper off and dry the blades with a clean dry cloth and start clipping again. If upon cleaning your blades you find that the blades will still not cut, there may be a few fine pieces of hair trapped between the upper and lower blade. If this happens, you will need to snap the blade off the clipper. Proceed to slide the upper blade to one side, without loosening the tension spring or moving the upper blade completely out from under the tension spring. Wipe the surface between the blades clean with a dry cloth, then place a drop of clipper oil where the upper and lower blades meet and also in the guide slot of the tension spring. Now slide the upper blade to the opposite side of the lower blade and repeat this process. After completing this procedure, slide the upper blade, centering it over the lower blade. Handle or store your Andis Clipper with the blades down so excess oil will not run into the clipper case.

Changing the Blade Drive Assembly
If your clipper blades no longer cut properly, it could be that your blade drive assembly needs replacement. To change the blade drive assembly, remove the blade set. Remove drive cap. Remove blade drive mounting screws. Before removing blade drive assembly, note the way it is positioned. This will help you in reassembly. Remove blade drive assembly. Drive bearing should be at its lowest position. If not, move it with your finger to lowest position. Put on new drive assembly, align screw holes and press down. Reassemble blade drive by replacing mounting screws, turning just until snug. Do not over tighten. Replace drive cap. Replace blade.

Maintenance
The internal mechanism of your clipper motor has been permanently lubricated by the factory. Other than the recommended maintenance described above, no other maintenance should be performed, except by the Andis Company or an Andis authorized service station.

Charging Your Clipper

1. Remove the charger from the carton and plug into an AC outlet as identified on charger unit and on carton.
2. Place the Andis Model AGR+ Cordless Clipper in the form-fitting pocket in the charger base. Note that the battery pack is fitted with a slot to align properly with the charger. Once the battery and charger are aligned, press the battery pack firmly into the charger until it rests at the bottom of the pocket. You may hear a click as the charging contacts engage. This is normal. The battery pack may be charged while on the clipper, or separately. Push the battery release button on the clipper, and pull straight out to remove the battery. NOTE: The battery pack is designed to run the clipper for about one hour. A clean, sharp, well oiled blade will provide the best run time. A busy animal shop may want an additional battery pack, so one pack is charging while the other is running the clipper.
3. Before initial use, battery pack must be charged for a minimum of one hour.
4. The charger base has two indicator lights. Below is a description of the SensaCharge light sequences. NOTE: The continuous red light may turn on at the end of the fast charge cycle for a NiMH battery pack. This is a normal condition and the battery pack is still ready for use. This precaution is to prevent multiple fast charge cycles while the battery is hot. The red light will go out after a few minutes.
   Continuous Green Light (Fast Charge) - Charger will fully charge battery pack in less than one hour.
   Rapid Green Blinking Light (Charging Complete) - Battery pack is fully charged.
   Long Green Blinking Light ("Refresh") - Charger is draining battery pack in preparation for fast charge. Please reference the section "Use of the Refresh Feature" on page 6 of enclosed instructions for explanation.
   Short Green Blinking Light -
   a)With Continuous Red Light (Charge Standby) - Battery pack is trickle charging because it is either too hot or too cold to accept a fast charge. Fast charging will occur once battery pack temperature moderates.
   b)Without Red Light (Charge Preparation) - Battery pack is undergoing trickle charge, because it has been drained excessively during the use.
5. The clipper can be left in the charger base for an indefinite period of time. The charger will supply only what is needed and will not damage the battery due to overcharge.

1. Clipper motor switch must be in the "OFF" position for the charger to operate properly. Do not return the clipper to the charger base with the motor switch in the "ON" position. If the clipper is accidentally put on the charger base with the switch in the "ON" position, remove it promptly. Turn clipper off and return to the charger base.
2. Do not insert anything metallic into the battery pocket of the charger base.
3. Do not allow the ventilation slots on the charger base to become blocked or filled with foreign material. Avoid subjecting the charger to excessively dirty locations. If the slots become clogged with dust or hair, unplug charger and gently remove hair with a soft brush or a vacuum cleaner.
4. Do not attempt to charge any other battery other than the battery pack designed for your Andis AGR+ Clipper.
5. The battery pack contains an overload protection feature. Do not attempt to use it to power any other product other than the Andis Cordless Clipper. Do not touch the exposed metal contacts on the battery pack with any conductive material.
6. Do not store battery or charger where it is under 50°F or over 104°F, as damage may occur.
7. Do not expose the charger base or the battery pack to excessively damp conditions.
8. Avoid dropping the charger base and the battery pack. Do not attempt to use a damaged battery pack or charger.
9. Clean external parts of charger with a soft brush or damp rag. Do not use harsh abrasives, detergents, or solvents.

1. Your clipper, battery pack, and charger function as several interacting electrical systems. Good electrical contact must be maintained in order for the motor to deliver full power, the battery to charge properly, and the Refresh feature to operate. Limited or erratic performance caused by dirt or age can be restored in the majority of the cases if you do the following:
   a.Problem: Clipper motor starts and stops as if there were a loose electrical connection. Solution: Remove the battery pack from the clipper. Examine the battery pack opening in the clipper. Locate the two sets of motor contacts. Gently squeeze the metal leaves until they are about 1/16" apart using a long pliers or similar. DO NOT squeeze the metal leaves completely together or the battery pack will not re-insert.
   b.Problem: Charger does not fully charge the battery. Solution: Clean the battery pack bottom contacts (the portion inserted into the charging pocket). Clean the charger contacts. Re-align the charge contacts. To clean the battery pack contacts, rub gently with a pencil eraser until they are brightly polished. Use a cotton swab and 91% isopropyl alcohol to remove any residue or dirt. Denatured alcohol can also be used. Use care, as both products are flammable. Clean the charger contacts in the same way. Unplug Charger First. Make sure eraser dust and cleaners do not get inside the charger base. To re-align the charger contacts, again make sure it is unplugged, and gently pull the metal loops on the four contacts forward slightly. Do not severely bend, deform, or damage the contacts.
   c.Problem: Charger does not exit the Refresh mode. Solution: Clean the battery pack bottom contacts as noted above. Clean and re-align the charger contacts as noted above.
   d.Problem: Charger lights flash on and off as clipper or battery is moved side to side in the charger pocket. Solution: Re-align the charger contacts as noted above.
2. The charger base is designed to recharge battery packs that are at, or close to, room temperature (25°C/77°F). If a battery pack is returned to the charger unusually hot or cold, the charger will not enter fast charge mode. This is normal and the battery pack can remain in the charger. Under certain conditions the charger may not fully charge a battery pack that has cooled from an unusually hot temperature. Remove the battery pack for a few seconds, and return to the charger. The charger will then enter a second fast charge mode.
3. Optimum charging results will be obtained if the charging unit is operated in a place where the temperature is stable. Sudden increases in temperature may result in the battery pack receiving less than a full charge. Avoid locating the charger near heat vents, radiators, or in direct sunlight.
4. To increase the life of your battery pack, do not run the clipper until the motor completely stops. When the motor noticeably slows during the clipping where it did not before, charge the battery pack.
5. A new battery pack may not charge to full capacity on the first use. This is normal and does not indicate a problem with the battery pack or charger. About five cycles of using the clipper until the motor slows, and then recharging until the charger indicates "charging complete" will bring the battery pack to full capacity. This is called "forming" a battery pack.
6. Under normal room temperature conditions, there is no need to allow the charger base to cool between charging battery packs. Completely discharged battery packs may be returned to the charger base continuously for fast charge. If the room temperature is very warm, however, allowing the charger to cool 5 minutes between battery packs is advisable. If the charger has become too hot internally, fast charge will be discontinued. Remove the battery pack and replace after a 5 minute cooling period: the charger will reset automatically.
7. It is normal for the charger to become warm to the touch during operation.
8. Disconnect the charger from the AC outlet if long periods of non-use are anticipated.
9. Never store batteries in a discharged condition. Recharge them immediately after they are discharged.
10. Many factors influence the life of the battery pack. A battery pack that has received heavy use and is over a year old may not give the same run-time performance as a new battery pack.

1. The charger base needs to be plugged in for the Refresh feature to work.
2. With the AGR+ clipper or AGR+ battery pack in the charger base, press the Refresh button once. The green light will blink while the battery is discharging.
3. The green light will stop blinking, and remain continuous when the battery pack is charging once again.
4. If the refresh button has been accidentally pressed, there are two ways to stop the battery pack from being discharged. Removing the clipper from the charger, then returning it, will cancel the Refresh operation and resume fast charge. You may also unplug the charger base for several seconds to reset the charger.
5. NOTE: The Refresh cycle takes approximately eight hours to produce a fully charged battery pack. The charger must make accurate battery voltage measurements during this time.