Premium overflow boxes for wet/dry aquarium filters
Effectively transports aquarium water to under cabinet sumps
Bulkhead fittings allow convenient and secure aquarium plumbing
Quality overflow boxes feature bulkhead fittings for secure and convenient installation. Use these easy-to-install overflow boxes to transport aquarium water to under cabinet sumps, refugiums, or wet/dry filters. Gravity-feed system eliminates the need for complicated drilling or aquarium modifications.
Includes: U-tube, cylinder (round) foam, nylon screw and wing nuts, and pre-filter box. Nano has 3/4" bulkhead, PF-300 - PF-1200 have 1" bulkheads, and PF-1800 has 1-1/2" bulkhead.
4" x 2.5" x 8.5" H
Up to 20 gallons
6" x 3" x 10" H
Up to 75 gallons
8" x 3" x 10" H
Up to 125 gallons
9" x 3" x 10" H
Up to 150 gallons
10" x 3" x 10" H
Up to 200 gallons
12" x 4" x 10" H
Up to 300 gallons
NEW Replacement Nylon Screw Set includes (2) Wing Nuts, (2) Threaded Screws, and a Thumb Screw. Replace old or worn nylon screw and wing nuts to ensure secure placement of overflow box.
Please click on "More Information" for directions for use.
Directions for Use
Assemble the parts making sure that the water exits from the Intake Box through the U-tube and into the Pre-filter Box.
The siphon is started by first filling the aquarium until water flows into Intake Box. Then carefully fill the Pre-filter Box with a cup or two of water. Suck the air out of the U-tube using clear airline tubing (1 ft) until the U-tube is full of water. This is done by bending the airline and inserting it into the U-tube. Be sure the ends of the U-tube are fully submerged so that no air can enter. You may need to add more water to the boxes as you do this. The siphon is now primed and water will automatically reach an even level in both boxes.
NOTE: No air must be allowed to enter the U-tube if the siphon is to be maintained.
If the level of water in the aquarium increases, it will enter the Intake Box and will then siphon into the Pre-filter Box. The water level in the Pre-filter Box will rise until the water flows into the Exit Tube where it will empty into the sump. The main water pump in the sump will then return the water back into the aquarium and continue this cycle. As with any overflow system, it is critical to maintain constant water levels by means of a top-off system or by regular top offs.
Nano Box Overflow Box
To Install Nano Box Overflow Box (Manufacturers Recommendation)
Slide a PVC Pipe into the 3/4" ID opening of the bulkhead.
Slip the tubing over the opposite end of the PVC pipe.
Which aquarium filter is right for you? Today's aquarium filters include undergravel filters, power filters, canister filters, wet/dry filters, and internal filters. Read more to make the smart aquarium filter choice.
Unlike natural aquatic systems, toxic compounds accumulate quickly in an enclosed aquarium system. Without a natural means to efficiently remove these toxic compounds or wastes, conventional aquariums are dependent upon filtration devices.
There are three basic types of aquarium filter media and each performs a different job to help keep a clean and healthy aquarium environment. This article gives a basic overview of the three main types of filter media.