Answer:
Hello, sry for the delay in response, I've had a bit of problems with visitors in my home, but they finally moved out last week.
Back to these 'hoodie's', they come in different colors, and although i asked for 1 of each color, I got 2 grey, and 1 in red. So when you place the order be sure to call them and see if they will attempt to get the color you would like 1st, then a secondary, and/or third one as well...as the nice lady I spoke to on the phone, said she would place a notation on the order for me :)
Messurements of the 'hoodie's' are: when layed-out flat, from the top of the hood to the bottom of the waist end is:9 1/4 inches. when flat the width is:4 inches.
top of hoodie has a slot for the color ring to come through for a leash, It is 3 inches from the top of the hoodie.
The width messurement around the neck is: 8 inches (there is a cord,so you can tighten it up and/or to tie a bow in it around the neck of your critter.)
The width messurement below the arm/legs is: 9 inches around, it could probably stretch more if needed as your critter gains more weight :)
The arm opening is 1 inch from the neck seem and the arm/leg openings should fit at least 3-4 inch limb's.
Then the distance between the arm/leg is:3 and then 4 inches to the bottom of the garment.
Meaning there's a elastic waist for the underside at : 3 inches from the arm/leg opening
and then the back side (top of the back of your critter) the distance between the arm/leg opening is: 4 inches.
I have 1 female ferret that these hoodies are a tad large on her, but I've taken up the seam by an inch and it fits her better now.
I also have a small male but his girth is wider than the female, but his head is small like hers, so had to shorten the hoods for those two.
The 3rd male is alot bigger than the other two, and I didn't have to do anything to his hoodie, other than that I embroidered his name (as well as embroidered the others name's onto their hoodies too. :)
Take care :)
 "Ferret Sweatshirt by Marshall")
