Playland Play Gym

Rugged, wooden bird playstand rivals the treetops to encourage your large sized bird to climb and perch. Hardwood construction is hand-sanded with rounded corners and recessed screw assembly for your bird's safety. Features five climbing surfaces, plastic climbing chain, two large top perches, finely ribbed PVC ladder rungs, two plastic treat cups, and wipe-clean laminated base. 20" comes in natural wood and also feature a swing. Simple assembly.

Please click on "More Information" for product specifications, cleaning, and assembly instructions.

Product Specifications: Made of oversized, chew resistant, kiln-dried hardwood that has been carefully hand-crafted and sanded with rounded corners. Parts wedge assemble with stainless steel pins and deeply recessed screws. PVC ladder rungs are finely ribbed for slip-resistant grips. Laminate base surface easily wipes clean with a soft cloth. Nontoxic and free of glue and chemicals.

20" Rolling Base fits 18" and 20" wide play gyms/playstands.

Cleaning Instructions: Laminated base and wooden components wipe clean with a damp soft cloth. For a more thorough cleaning use a solution of 1/2 cup bleach to 1 gallon of water. Thoroughly rinse and air dry before returning to your pet's environment. NOTE: Vegetable-based colors may run if they become wet. This is normal and safe for your bird.

Assembly Instructions: Easy-to-assemble design boasts recessed metal screw assembly for added safety. Before you begin, you will need the following tools (not included): Phillips Head Screwdriver and Pliers. NOTE: Do not fully tighten screws until all components and screws are in place. Ensure each screw is fully tightened, however, before exposing the playland to your bird.

1. Screw Top Walk to the top of the Slant Ladder using (2) 1-5/8" Screws. Fasten the other end of the Top Walk to the Small Vertical Ladder using (2) 1-5/8" Screws.
2. Screw Second Slant Ladder to the side of the Top Walk using (2) 1-1/4" Screws. Screw the Long Vertical Ladder to the other end of the Second Slant Ladder using (2) 1-5/8" Screws.
3. Gently spread open the halves of the Swing to prepare for step 4.
4. Fit the Swing Halves over the (2) Top Walk Rungs and press them together. Insert (2) Metal Pins through the holes in the Swing and into the holes in the Top Walk Rungs. Note: Light taps with a hammer may help reseat the Swing Rungs and secure Pins.
5. Fasten Ladder Assembly (Steps 1-4) to the Base using 6 Hex Nuts.
6. Install Feed Cup Walks to the top of the Vertical Ladders using (2) 1-1/4" Screws on each. Install Feed Cups using 1 Wing Nut on each.

1. Fasten the two Leg/Caster Assemblies to the Vertical Post using a Wing Nut.
2. Fasten the Top to the Vertical Post using one Screw.