Kennel-Aire Giant Standard Square Back Cage

Perfect for an at-home cage - set it up and your pet has a special space of his own. This Classic Square Back cage comes with unique cam locking system to keep your pet contained. Heavy 6 and 9-gauge wire mesh spacing varies from 1-1/2"-2" wide and 5" tall. Same unique, easy-to-clean, chew resistant polyethylene tray in all Kennel-Aire models.

Product Size Chart:

Optional Divider Panel allows you to buy a crate for your pet that will fit when he is an adult.

Optional Floor Grate provides the practicality of removing the pan without bothering the pet.

This item is not available for shipment to Alaska or Hawaii. We apologize for any inconvenience.

• Time tested welded steel makes this cage tough
• All cages have extra headroom
• Excellent for housebreaking a new puppy

If introduced correctly, a wire cage provides a sense of security--a refuge where your dog can go whenever he needs to get away from the high activity level of your home or just wants some peace and quiet.

Intelligent, key-like cam lock design means your dog won't be able to get out of the cage and endanger himself. Yet the lock is easy for us "smarter humans" to open!

6- and 9-gauge closely spaced wire provides sturdy construction as well as preventing pets from getting their feet or mouths through the spaces. This cage lasts and is a safe enclosure for your pet.

Accessories:

• Polyethylene Tray - Gorilla Tough trays are easy to clean and disinfect. Less worry for you. Trays are rustproof and won't corrode or peel. And polyethylene trays are much lighter than traditional metal trays.
• Floor Grate - Optional vinyl-coated floor grate provides the practicality of removing the pan without bothering your pet.
• Divider Panel - Change your cage to fit your puppy as he grows. Positions easily anywhere across the cage. Zinc finish only.

Contents:

1 - Floor
2 - Corner Pins
1 – Top Panel
1 – Right Side/Front Panel Combination
1 – Crate Pan

Instructions:

1. Remove cage from box and place on open floor.	2. Separate into individual parts.
3. Place floor panel on floor with hooks up. The floor panel is the one with the widest spaces between the wires. Place the left side/back panel combination (with double cross wires at the bottom) over floor panel hooks and lay on floor.	4. Lift left side/back panel combination into upright position, making sure that cross wires catch inside floor panel security hooks.
5. Repeat process with right side/front panel combination. Be sure to check that door is on the outside of crate panel and will swing to the left when opened.	6. Attach the back panel (the panel without a door) to side panel. The top loop of the side panel should rest on the top loop of end panel. When loops are correctly aligned, insert corner pin through all loops.
7. The curved end of the pin should face outward.	8. Attach door panel using this same procedure. Top loop of the side panel should rest on top loop of door panel.
9. Hook top panel over right side panel and then push left panel inwards, hooking top panel in place.	10. Make sure end panels are locked in place by overlapping with end hooks.
11. Slide crate pan into place. To open door turn cam lock counterclockwise, swing cam lock outward and lift door to clear door hooks.

To Clean: Wash with soap and water or any general household cleaner. Do not use anything that is abrasive. Dry thoroughly to prevent rusting.