Cal Pump Power Control Center

Programmable power center allows digital timer control of line and low voltage light fixtures. Fuse-protected unit features (2) timer controlled 110V outlets, (2) constant power supply 110V outlets, and (1) timer controlled 12V outlet for convenient custom control of electrical pond equipment. 15 ft or 50 ft outdoor power cord. UL-Listed. Suitable for indoor or outdoor use. The Power Control Center measures 7-7/8" x 5-1/4" x 6-1/2" high.

Features and Benefits

• Digital Timers - Easy to set timers control both line voltage and low voltage light fixtures.
• Robust 15 ft or 50 ft 12-gauge outdoor power cord allows you to set up power and timers exactly where you need them.
• Fuse protected.
• UL-Listed for consumer confidence.

Versatile - Use For:

• Landscape Lighting
• Holiday lights
• Ponds and water gardens and more!

Downloadable Cal Pump Power Control Center Instructions PDF, Cal Pump Power Control Center Intro PDF, and Cal Pump Power Control Center Update PDF.
(All require Adobe Acrobat Reader 4.0 or later - get it here for free)

Please click on "More Information" for installation instructions.

Timer Controls
The minimum setting time is one minute and the maximum setting time is 24 hours. There are a total of six ON-OFF positions. The light will stay lit during the programming for one minute.

SETTINGS:
MODE- Switch to programming (the word "MODE" does not appear).
RUN - Automatic Operation
ON
OFF

1. Plug the power supply cord into an outlet that is 120 volts AC 60 Hz.
2. Press "RESET" button once to clear all programs.
3. Setting the time: Press "SET" and then press "HOUR" and "MIN" button to adjust the current time (Military Time).
4. Press the "SET" once and the screen will display "1 ON".
5. Press "HOUR" button until desired time is reached.
6. Press "MIN" button until desired time is reached.
7. Press "SET" button to set the "off time" and the "ON" will disappear from the screen. Now press the "HOUR" and "MON" button to set the "off time".
8. Repeat Steps 3 through 6 for maximum of 36 programmable options per day.
9. When finished programming, press the "MODE" button until "RUN" is displayed on the screen to start operation.

To override the program, press the "MODE" button until "ON" is displayed. To turn off, press "MODE" button until "OFF" is displayed. For automatic operation, you must put the unit back into "RUN" mode.

NOTE: This unit is equipped with a RESET button. In the event of a programming malfunction, press the RESET button. This will clear all programs. Repeat STEPS 1 through 9 to program timer.

CAUTION:

• To reduce risk of fire, replace only with the same Type 15A, 125V (or above) fuse.
• Not for use with dimmers.
• Disconnect all power supplies before servicing.
• If installation involves running wiring through a building structure, special wiring methods are required. Consult as a qualified certified electrician.

General Information
The Power Control Center (PC50-15) is designed to provide power where you need it, and when you need it. The PC50-15 comes complete with a 15 ft power cord. There are (2) 120Voutlets on a digital programmable timer and (2) 120V outlets that provide constant power. NOTE: Maximum amperage for the 120-volt outlets is 10 amps TOTAL. A low voltage outlet with a maximum output of 150 watts is also on a digital programmable timer. The low voltage outlet may be used to power any 12VAC lights up to 150 watts.