Rapids Mini Canister Filter

Optimum 3-stage filtration easily hangs directly on the back of the terrarium or stands on its own. Keep your water clean, odor-free and clear with a super-efficient, quiet and compact filter that features self-priming, top-mounted sealed motor with 80 gph flow rate. For terrariums up to 20 gallons. Easy to start and setup, and includes built-in flow meter. 3-1/2" x 5-11/16" x 7" high.

Includes: Floss roll with activated carbon and super porous ceramic cylinders, high-efficiency intake strainer, spray bar, and canister hanger.

Please click on "More Information" for assembly instructions and directions for use.

Assembly Instructions

1. Insert the Filter Compartment Partition into the inside grooves of Canister Housing.
2. Place Ceramic Cylinders in the Biological Chamber of the Canister Housing.
3. Wrap the Floss/Carbon Media around the Media Core Tube and position in the Media Compartment of the Canister Housing.
4. Make sure O-ring is properly positioned so Power Unit is securely sealed.
5. Place the Power unit onto the Canister Housing and press the Clips downward to seal the Canister Filter.
6. Press the Strainer onto one end of the Intake Tube.
7. Slide the Suction Cup onto the Intake Tube.
8. Insert the other end of the Intake Tube into the U-Tube Intake.
9. Take one of the two Expandable Hoses and connect the large end to the U-Tube Intake.
10. Connect the other smaller end of the Expandable Hose to the Power Unit Inlet.
11. Insert the Spray Bar with end cap into the U-Tube Outlet.
12. Slide the two Suction Cups onto the Spray Bar.
13. Take the second Expandable Hose and connect the large end to U-Tube Outlet.
14. Connect the other smaller end of the Expandable Hose to the Power Unit Outlet.
15. Place the Canister in the Hanger and hang on the frame of the terrarium.*
16. Position the U-Tube Inlet and U-Tube Outlet on the frame of the terrarium.
17. Attach the Spray Bar and the Intake Tube to the terrarium by pressing the Suction Cups against the glass.
18. Open the Water Primer Cap and fill Canister with water to top of opening.
19. Wait 5 minutes. The Filter Media will absorb water and additional water will be needed to top off the Canister.
20. Close the Water Primer Cap, making sure the O-ring is positioned correctly.
21. Plug the AC Adaptor into standard 120V electrical receptacle. Note: Do not force polarized plug into non-polarized receptacle.
22. Check for leaks to confirm Canister is properly sealed and O-ring is in position.

Operation Instructions

1. Mini Canister Filter will pump 80 gph at full flow.
2. Exhaust flow from Spray Bar should break the surface of the water slightly. As the surface is agitated, better gas exchange occurs and oxygenation increases.
3. DO NOT allow Canister Filter to run dry at any time; DO NOT operate this product out of water.
4. Unplug power cord from electrical receptacle before cleaning or servicing.
5. Use of a GFCI (ground fault circuit interrupter) is recommended.
6. If your water becomes cloudy due to heavy particulate matter, you can remove the Biological Media (Ceramic Cylinders) and replace it with additional Floss/Carbon Filter Media. The extra media will provide additional mechanical and chemical filtration. The floss will trap particulate matter and the activated carbon will adsorb dissolved organics. A partial water change of 25% will help reduce discoloration also.
7. When you need to clean or replace filter media, the indicator shows with Red Color.

Maintenance
To ensure optimum performance, it is recommended to replace the Floss/Carbon Filter Media every two to four weeks depending on terrarium population and number of daily feedings.

Under normal operation, it is not necessary to clean or replace Biological Media. If the Biological Media becomes heavily soiled, remove and gently rinse in dechlorinated, room temperature water.

Periodic inspection and cleaning of the Impeller is recommended.