Lifegard Aquatics Big Digital Temp Alert

Maintain ideal temperature in your reptile habitat. Lifegard Aquatics Big Digital Temp Alert for Reptiles features a programmable alarm that alerts you when the temperature is not within an acceptable range. This large face, digital thermometer with four alert features measures and displays water temperature or room temperature in degrees Fahrenheit (°F) from minus 58°F to 158°F. Includes 3 ft cord with all plastic probe and suction cups.

Four Alert Features:
(Alarm will sound & LED Flashes)

1. High Temp Alert Only (Probe)
2. Low Temp Alert Only (Probe)
3. Both High & Low Temp Alert (Air/Room)
4. Both High & Low Temp Alert (Probe)

Please click on "More Information" for operating instructions.

Operating Instructions
Remove sticker from face of thermometer.

To Install Included Battery: Battery Type: AAA. Use fingernail or coin to lift up battery cover and insert battery in direction indicated.

Digital Display Indications:
IN = Air/Room Temperature
OUT = Probe/Water Temperature

Place probe with suction cup inside aquarium or wet/dry filter. Fully submerge probe under water. Do not submerge meter or allow meter to get wet or damage may occur.

To Set Alert:

1. HIGH TEMP ALERT ONLY (Probe)
   Slide "Temp/Alert" switch to "Alert." Press "Alert/Select" button to High Temp alert mode. Press "High Set" button to set desired high temperature point. Press "Alert On/Off" button to activate alert feature. ("Alert" will appear on display.) Slide "Temp/Alert" switch back to "Temp." Alarm sounds and LED light flashes for 5 seconds every minute when temperature is above High temperature set point.

2. LOW TEMP ALERT ONLY (Probe)
   Slide "Temp/Alert" switch to "Alert." Press "Alert/Select" button to Low Temp alert mode. Press "Low Set" button to set desired low temperature point. Press "Alert On/Off" button to activate alert feature ("Alert" will appear on display). Slide "Temp/Alert" switch back to "Temp." Alarm sounds and LED light flashes for 5 seconds every minute when temperature is below Low temperature set point.

3. BOTH HIGH & LOW TEMP ALERT (Air/Room)
   Slide "Temp/Alert" switch to "Alert." Press "Alert/Select" button to High & Low Room temp alert mode. Press "High Set" button to set desired high temperature point. Press "Low Set" button to set desired low temperature point. Press "Alert On/Off" button to activate alert feature ("Alert" will appear on display). Slide "Temp/Alert" switch back to "Temp." Alarm sounds and LED light flashes for 5 seconds every minute when temperature is above High or below the Low set point.

4. BOTH HIGH & LOW TEMP ALERT (Probe)
   Slide "Temp/Alert" switch to "Alert." Press "Alert/Select" button to High & Low Probe temp alert mode. Press "High Set" button to set desired high temperature point. Press "Low Set" button to set desired low temperature point. Press "Alert On/Off" button to activate alert feature ("Alert" will appear on display). Slide "Temp/Alert" switch back to "Temp." Alarm sounds and LED light flashes for 5 seconds every minute when temperature is above High or below the Low set point.

Use with pop-up stand, mount with screws or attach to any surface with pressure sensitive adhesive pad.