Includes: 13 ft intake hose, 76" 4-pc rigid extension (one transparent/clear extension to monitor operation), 6-1/2 ft discharge hose, 13 ft cable, 3 nozzle attachments, filter bag, and discharge net. 7-gallon capacity.
Please click on "More Information" for installation, maintenance, and cleaning instructions.
The WaterGarden Outfitters Pond Vacuum XPV (External Pond Vacuum), as termed in the following text, is a sludge suction unit for the removal of pond sludge. This unit is intended for use under proper supervision by qualified persons, as stated in Safety Information section, below. Never allow the unit to operate unattended. The unit can also be used as a dry vacuum cleaner.
Note: Personal injuries can result from this unit if it is not used in accordance with its intended use and in the event of misuse. Warranty and operating permit will become null and void if used for purposes other than its stated intended use.
Step 1 – Unlock the Container Locking System, remove Motor Housing.
Step 2 – Remove all additional parts from the Collection Container.
Step 3 – Refit and lock Motor Housing.
Step 4 – Push the end of the Intake
Hose into the Inlet Opening of the
Collection Container. Attach Extension
Tubes as needed. Fit one of the
supplied Nozzles or set the Adjustable
Bottom Nozzle to the situation your
Step 5 – Push the open end of the Drain Hose into the rear Drain Opening of the Collection Container. If possible, lay the Drain Hose flat to allow gravity to assist draining of the sludge water during automatic emptying. If necessary, affix the Sludge Collection Bag to the end of the Drain Hose.
Use as Sludge Remover
Use as a Dry Vacuum Cleaner
Make sure the unit stands safely and is stable. Turn the unit off and remove the cord from the power source.
Maintenance and Cleaning