TotalPond Pond Aerator with LED Lights

Space-saving workhorse stretches your pond budget with multiple, four-season use. TotalPond Pond Aerator with LED Lights is an innovative, multifunctional unit that enhances pond aeration, water circulation, filtration, illumination and decoration while using less energy. Submersible, energy-efficient 280-gph pump with venturi adapter produces a column of bubbles that increases vital aeration and water circulation. Included filter pad and ceramic bio-media provide mechanical and biological filtration to improve pond water quality. 18 energy-efficient LED lights illuminate the bubbles for a beautiful lighting effect. Included artificial plants decoratively conceal the unit while 6" diameter artificial lily pad cleverly keeps airline tubing above water level.

TotalPond Pond Aerator with LED Lights measures 7-3/4" diameter x 6-3/4" high. Unit may also be used in the winter to maintain an ice-free area to ensure proper gas exchange.

Downloadable TotalPond Pond Aerator with LED Lights Manual PDF.
(Requires Adobe Acrobat Reader 4.0 or later - get it here for free)

Shop all Pond Aeration Products.

Please click "More Information" for assembly and installation instructions.

• Estimated Assembly Time: Five minutes
• Tool Required for Assembly: No tool required

Operation Instructions

1. If desired, attach the included artificial plants to the cover of the aerator.
2. Connect the air hose to the air valve. Note that the air valve is connected to the lily pad.
3. Tie the anchor to the air hose. This will prevent the air hose from floating to the surface during operation.
4. Place the aerator in the water. Be sure that the air valve and lily pad stay above the water level.
5. Connect the pump to a proper power source.
6. Adjust the valve to control the amount of bubbles coming out of the aerator. For more bubbles, turn counterclockwise. For less bubbles, turn clockwise.

Disassembly Procedure
In order to ensure optimal operation of the aerator, the following procedures should be performed periodically. When the performance of the aerator is reduced, it is an indication that cleaning of the unit is needed.

1. Unplug the power cord and then carefully remove the aerator assembly from the pond.
2. Remove the cover by turning counterclockwise and lifting it from the base.
3. Carefully remove the filter pad. Rinse it with water to clean any debris off the surface.
4. Carefully remove the aerator from the pump. Disassemble it and then rinse the parts in water to remove any debris.
5. Remove the tray to expose the pump. Remove the pump and clean as needed.
6. Reassemble all components.
7. Connect the pump to a proper power source.

Care and Maintenance

• Regular cleaning of the aerator may be necessary depending upon the environment in which it is operated. Clean the aerator when it is visibly soiled or when a drop in performance is detected.
• Before cleaning, always disconnect the aerator from the power source.
• Remove all parts from the aerator in clean warm water.
• Disassemble the pump cover and remove the impeller cover to expose the impeller assembly. Use a soft cloth or brush to clean the impeller assembly and the inside of the impeller housing.
• Regular cleaning of the aerator housing may be necessary depending upon the environment in which it is operated. Clean the aerator housing when it is visibly soiled or when a drop in performance is detected.