EasyPro Pond Monsta

Own the pond-cleaning sensation from "across the pond" for muck-busting power. EasyPro Pond Monsta Pond Vacuum embraces European design sensibility that eliminates bulky vacuum canisters found on traditional pond vacuums. Sleek, "stick-style" unit employs a submersible vacuum head that makes short work of pond muck, sludge, sediment and organic waste. Since the vacuum head is actually in the water, the Pond Monsta experiences minimal loss of initial suction due to friction. Vacuuming power begins right in the water! Direct drive impeller rapidly and continuously draws in sludge and other pond debris and transports dirty pond water to a remote debris collector. Removable mesh filter traps large particles for convenient disposal or composting. Depending on sludge or particulate content, return vacuumed water to your pond or discharge into your garden to nourish flowering plants. The EasyPro Pond Monsta Pond Vacuum features a built-in thermal auto shutoff and removes large particles up to 1-1/4". Operates at a minimum water depth of 12" and a maximum water depth of 16.4 feet. 40 ft power cord.

Includes: Submersible Vacuum Head, Brush Head, 20 ft Discharge Hose, 7 ft Telescoping Handle, Spare Impeller and Debris Collector with removable mesh filter and dual discharge outlets.

NOTE: Trigger-style handle requires a GA 23A Alkaline Battery to activate Pond Monsta Pond Vacuum.

Downloadable Pond Monsta Instructions PDF.
(Requires Adobe Acrobat Reader 4.0 or later - get it here for free)

Please click on "More Information" for operating instructions.

1. Plug in GFCI (ground fault circuit interrupter) outlet.
2. Plug in fitted three-prong RF receiver plug.
3. Plug in RF receiver connector plug.
4. Connect hose firmly to hose outlet.
5. Choose water recycling option for the Collector.
6. Place hose in Collector Inlet Locator.
7. Connect hose and cable to hose clips. Adjust so that the hose is level with the water surface when the Pond Monsta is fully submerged.
8. Adjust pole by twisting and locking to a comfortable height.
9. Switch on main electrical supply. Standby light will show red on the RF receiver.
10. Submerge Pond Monsta fully until air stops releasing from air outlet (the Monsta will not pump effectively until all air is released).
11. Compress safety button and squeeze lever to activate pump and release to turn off.
12. Waste will now start to flow into the Collector. It is recommended that the higher shelf areas are cleaned first. Always move the Pond Monsta in a slow back and forth motion to prevent disturbing the sediment and waste.
13. Clean the base of the pond, again using a slow back and forth motion using the clear hose as a visual guide to indicate which areas have been cleared.
14. When the Collector Basket is full or overflowing, turn off the Pond Monsta by releasing the handle and remove the collected debris to waste or compost.

Clearing Blockages
It is normal for your Pond Monsta to require occasional clearing during operation. Pond Monsta has been designed so that this requires a minimum of time and effort.

1. Check head and unclip if required.
2. Insert cleaning spike into outlet to clear air blockage.
3. Remove outlet blocking nut to access outlet elbow if blocked.
4. Remove impeller cover clip screws, open both clips and remove impeller cover to access impeller chamber.

Monsta Collector Water Recycling Options
With the use of the Pond Monsta Collector, you can recycle your pond water back into the pond, discharge directly into your plant beds (pond water is an excellent feed source your plants can use to grow tall and healthy), or the waste water can go directly into a drain in accordance to local ordinances.

• If there is low sludge content-recycle water back into pond.
• If there is high sludge content or a beneficial partial water change is required-pump water into garden border.
• If there is an excessively high sludge content-water can be filtered of large solids and pumped into waste or drain in accordance to local ordinances.

Technical Specifications & Performance
Voltage/Hertz 115V/60Hz
Watts 350
Safety Rating IPX8 CE
Cable Fitted 32.8 ft + 9.8 ft
Remote Control Handle Battery GA 23A Alkaline Battery
Maximum Submerged Depth 16.4 ft
Maximum Flow Impeller 1,188 gph
Maximum Lift Impeller 9.5 ft