Matala biological filter for koi ponds and water gardens
*
Expandable, high-capacity pond filter accommodates a variety of ponds
*
Provides unparalleled biological filtration for superior pond water quality
Expandable gravity filter maximizes Matala® filter media performance. The rugged Biosteps 10 contains an amazing 200 sq. ft. of surface area for beneficial bacteria growth. Combined with a cross flow design that traps and processes more debris at high flow rates, you get unparalleled biological filtration for superior water quality. Combine multiple units for large or heavily stocked koi ponds, or use Biosteps 10 with UV Clarifier for improved water clarity. Universal barbed inlet (1", 1-1/4", 1-1/2"), 1-1/2" outlet. Measures 23-3/16" x 15" x 20-3/16" high.
Biosteps 10 w/Spillway makes it extremely easy to incorporate a waterfall into your pond or water garden design. Built-in waterfall discharge produces a beautiful cascade that flows directly into your pond - or create a meandering stream or tiered water course. If you already own a Biosteps filter unit, then the 11" x 7" x 7-1/2" high Spillway Upgrade is the perfect choice to enhance your pond with dynamic water movement.
Enhance your existing Biosteps 10 Progressive Pond Filter with an add-on Matala UV Clarifier. This simple upgrade lets you conveniently retrofit your Biosteps 10 or Biosteps 10 w/Spillway. Suppress blooms of suspended green algae, harmful bacteria, parasites, fungi protozoan and viruses. Also great as a replacement unit for your Biosteps 10 with UV Clarifier.
Model
Max Pond Size
Max Flow Rate
Biosteps 10 with Spillway
2,660 gallons
1,060 gph
Biosteps 10
2,660 gallons
1,060 gph
Biosteps 10 with 9W UV Clarifier
800 gallons
400 gph*
Biosteps 10 with 13W UV Clarifier
1,200 gallons
600 gph*
Biosteps 10 with 18W UV Clarifier
1,600 gallons
800 gph*
*Recommended flow rate for optimum UV performance.
Please click on "More Information" for directions for use and flow rate charts.
Please Note: These products are not available for shipment to California. Sorry for any inconvenience.
Assembly Instructions for Biosteps 10
Insert Outlet Fitting through upper hole of the Biosteps 10 (the side with a single opening). Place O-ring on inside of filter and over the threads. Hand tighten nut. Do not overtighten.
Insert Drain Fitting through lower hole of the Biosteps 10 (the side with 2 openings). Place O-ring on inside of filter and over threads. Hand tighten nut, do not overtighten.
Insert clear, Universal Hose Fitting through the upper hole of the Biosteps 10 Filter (the side with 2 openings). Place O-ring on inside of filter and over the threads. Hand tighten nut. Do not overtighten.
Insert Matala filter media into the Filter Body in the following order: Green (2), Blue (2), Black (3), and Gray (1).
Insert Partitioning Screen in the final position to prevent Matala filter media from blocking the Outlet Pipe.
Snap the lid onto the filter.
Connect pump to Biosteps filter and check for leaks.
Assembly Instructions for Biosteps 10 UVC
Insert Outlet Fitting through upper hole of the Biosteps 10 (the side with a single opening). Place O-ring on inside of filter and over the threads. Hand tighten nut. Do not overtighten.
Insert Drain Fitting through lower hole of the Biosteps 10 (the side with 2 openings). Place O-ring on inside of filter and over threads. Hand tighten nut, do not overtighten.
Insert clear, Universal Hose Fitting through the upper hole of the Biosteps 10 Filter (the side with 2 openings). Place O-ring on inside of filter and over the threads. Hand tighten nut. Do not overtighten.
Attach UVC to Biosteps. Insert clear, Universal Hose Fitting through the upper hole of the Biosteps 10 Filter (the side with 2 openings). Place O-ring on inside of filter and over the threads. Hand tighten nut. Do not overtighten.
Align and insert MPT of the UV Clarifier into the female thread of the clear Universal Hose Fitting. Hand tighten (clockwise) to secure UV Clarifier onto the Universal Hose Fitting. Make sure there is a watertight connection between the UV Clarifier and the Universal Hose Fitting (you may need to twist the Universal Hose Fitting until it is completely tight and flush with the UV Clarifier.
Insert Matala filter media into the Filter Body in the following order: Green (2), Blue (2), Black (3), and Gray (1).
Insert Partitioning Screen in the final position to prevent Matala filter media from blocking the Outlet Pipe.
Snap the lid onto the filter.
Connect UVC bulb to the Lamp Socket in the UVC Cap. Be sure to properly align the Bulb Pins.
Carefully insert the UVC Bulb into the Quartz Sleeve Tube and screw the UVC Cap onto the UVC Housing.
Connect pump to Biosteps filter and check for leaks.
Filter Startup
Your Biosteps filter is now assembled. Place your filter close to your water garden in a shaded spot. Choose a location that allows easy access for convenient maintenance.
Place the filter on a solid, level surface. Make sure the Filter Outlet can function properly without obstruction.
Connect the hose from the water pump to the Filter Inlet.
Attach a length of hosing to the Filter Outlet, making sure this return line is placed in your water garden.
Check for leaks. Make sure the O-rings are positioned correctly. If needed, use Teflon tape on the Threads of the Fittings.
Note: To ensure optimal filter performance (biological filtration), it is imperative to maintain water flow through the unit. If there is no water flow through the unit for more than 2 hours, the oxygen level in the Filter Body will drop and may result in the loss of beneficial bacteria and other microorganisms.
Filter Maintenance
Maintenance frequency will depend on many factors including:
Fish load and feeding rate.
Season and water temperature.
Established age of the pond.
Level of existing sediment/organic waste material.
In general, filter maintenance is only needed when the Matala Filter Mats are clogged. Water will begin to flow over the filter mats rather than through them.
Note: Turn off all electrical equipment before performing filter maintenance.
Remove lid.
Gently shake Matala pads up and down in the Filter to loosen debris particles.
Unplug Bottom Drain Plug.
A 1-1/2" drain hose can be attached to the Bottom Drain to direct wastewater away.
To prevent the loss of beneficial bacteria, do not clean Matala filter mats too vigorously.
Every water garden, whether plants only or stocked, benefits by some form of water circulation system to stay clean, healthy, and algae free. Learn how to choose the right pump for your pond.
Deciding what type of filtration your new or existing pond needs can be hard. Here's a quick overview of the most common filtration types available, and how they help improve the quality of the water in your pond.
Effective biological filtration occurs when
certain conditions are provided for the
beneficial bacteria. Learn simple ways to improve your ponds biological filtration.
Contains 8 sheets of Matala progressive pond filter media
Please note: This item cannot be shipped by air.
Please note:
Oversize or heavyweight items with this symbol ship for an additional $7.99 each. Additional shipping charges will apply during checkout.
Please note: Return of electrical equipment and lightbulbs to Drs. Foster & Smith for exchange or refund is limited to 60 days from the date of purchase. Beyond 60 days, please contact the manufacturer for repair or replacement as covered by the manufacturer's warranty.
Customers who bought this ALSO BOUGHT:(showing items - of 9)
Want to know if we drop the price on this item? SIGN UPfor an easy email alert!
What are Email Alerts? Learn here. You may end alerts at any time. | Manage alerts
Description:
Add a touch of rustic charm AND improve
water quality of your pond or water garden. Aquascape Inc Pond Filter Urn is a decorative ceramic filter that incorporates easily into any setting. Functional and aesthetically pleasing filter provides two ...
Description:
Cylinder pump pre filter for submersible pond pumps
Prevent impeller damage and reduce pump stress and wear Help extend the life of your TetraPond Water Garden Pump Easy upgrade prolongs pond pump life. The TetraPond Cylinder Pre Filter is ...
Description:
Waterfall filter for ponds and water gardens up
to 1,000 gallons. Create a beautiful waterfall that provides 2 stage pond filtration. Full liner attachable waterfall lip creates a reliable watertight seal
Description:
Filtration systems for ponds 600 to 1,250 gallons
Combines the PondMaster Filter with a fully submersible Mag Drive water pump Sturdy handle allows easy placement and maintenance > Pondmaster 1250 1700 Filter Systems combine the easy to use PondMaster ...
Description:
Amazing lighted waterfall weir adds nighttime drama Dramatic
single sheer waterfall illuminated by LED lights Ideal for formal retaining wall or pond free water features Create an evening hot spot with this cool running LED waterfall weir. Atlantic Water ...
 "Biosteps 10 Progressive Pond Filters")
Expandable gravity filter maximizes Matala® filter media performance. The rugged Biosteps 10 contains an amazing 200 sq. ft. of surface area for beneficial bacteria growth. Combined with a cross flow design that traps and processes more debris at high flow rates, you get unparalleled biological filtration for superior water quality. Combine multiple units for large or heavily stocked koi ponds, or use Biosteps 10 with UV Clarifier for improved water clarity. Universal barbed inlet (1", 1-1/4", 1-1/2"), 1-1/2" outlet. Measures 23-3/16" x 15" x 20-3/16" high.
