"Intelligent" Transformers

Connect multiple pond lights for an automated lighting system. Features a photo cell and timer that activates connected fixture once it gets dark. Set adjustable timer on Auto or 4, 6, or 8 hour intervals for hassle-free automated pond lighting. 200W and 300W models feature digital display and can be set in 1 hour increments, up to 9 hours, to suit your lighting needs. Use with Low Voltage Submersible Pond Lighting. Do not exceed maximum wattage capacity in any combination. All units have 2 terminal blocks. 60W includes 3-way input adapter.Requires 3-Way Socket Connection to connect compatible low wattage light fixtures.

Please click on "More Information" for safety and operating information.

• For use on 120 Volt circuits only.
• Outdoor receptacle should be of "GFCI" type (ground fault circuit interrupter).
• Should a short circuit or overload occur, the secondary breaker will trip and shut off the system. Remove the cause of the shutdown and wait 4 minutes and then reset the breaker by pressing the "RESET" button.
• Be aware of the maximum amp capacity of the low voltage cable used in the installation. When in doubt as to what size cable to use for the installation, contact a qualified electrician.
• The ambient temperature range in which this transformer will operate is from minus 22 degrees F to 105 degrees F.
• This transformer should be mounted with its bottom edge at least 40 inches above the ground.
• The transformer should have normal daylight exposure. Do not mount the transformer in a dark or heavily obscured location, as the photo cell will turn the system "ON" prematurely.
• Always plug the transformer in a grounded 120 volt receptacle.

60 watt
Connecting the Low Voltage Cable
Insert contact ends under each terminal pressure plate and securely tighten screws.

Operating Instructions

• Plug the unit in.
• When the control dial is in the "Auto" position, it means the system is controlled by the photo cell. At this setting, the system will turn ON at dusk and OFF at dawn, automatically.
• When the control dial is in the ON position, this overrides the photo cell and allows manual control of the system for daytime use and testing.
• The "4H," "6H," and "8H" timer settings allow the lights to turn ON at Dusk and turn OFF after 4, 6, or 8 hours after dusk.

The photo cell operates with a slight time delay to prevent false reactions to momentary changes in ambient light conditions, such as car headlights.