Versatile, multipurpose pumps power water fountains, waterfalls, and pond filtration systems
*
Energy-efficient performance enables reliable solids-handling and very low operating costs
*
Superior rotor design and durable ceramic shaft bearings ensure years of trouble-free operation
Versatile multipurpose water pumps great for water fountains or driving pond filtration systems. Quality construction features superior rotor design and durable ceramic shaft bearings for years of trouble-free operation. Easy-to-clean, removable filter cage is less prone to blockage for reliable performance and convenient maintenance. Fish Mate submersible, solids-handling pond pumps feature a 2-way outlet with flow adjuster to control flow rate to suit your particular water fountain, waterfall or pond filtration needs. Barbed tubing connector allows convenient installation. All electrical parts are fully encapsulated.
All pump models through Model 2300 include a fountain head set that creates four different water fountain patterns (tiered blossom, column, bell, and plume). Models 4000 and 5500 include a fountain head set that creates three different water fountain patterns (aerated plume, tiered blossom, and plume). Power cord: Models 800-2300: 24 ft; 4000 and 5500: 33 ft.
Please click on "More Information" for instructions and maintenance.
For optimum results, locate the pump at the opposite end of the pond to the filter return. The pump comes standard with pond-life friendly slots to help protect spawning life.
For your convenience, the pump should be positioned within reach from the side of the pond on a solid platform (e.g. paving slabs) approximately 12" below the pond surface. The pump should be at least 8" below water level to avoid problems of low water levels in summer. If desired, the Base Plate may be screwed down for extra stability. Avoid positioning the pump at the bottom of the pond where pond debris will accumulate and maintenance will be difficult.
Maintenance
Disconnect electrical supply from pump before removing from pond or contacting pond water. Do not carry or pull the pump by the cable.
When flow from your pump is noticeably reduced or fountain display has deteriorated:
Remove Strainer Cover and clean with a brush and hose. Remove any weed or blockage on Impeller Cover.
If you are using a fountain, remove and clean fountain head in water with a brush.
Reassemble. If the flow is still poor, check to see if outlet tubing has become kinked or blocked.
Once a year or if flow has stopped (check power supply first):
Disconnect electrical supply from pump before removing from pond or contacting pond water. Do not carry or pull the pump by the cable.
Disassemble pump to component parts. Wash all parts in clean water and reassemble the pump. The recommended disassembly procedure is as follows:
Disconnect all items fitted to pump Outlet.
Remove Strainer Cover and lift Pump Body from Base Plate.
Remove Impeller Cover by rotating counterclockwise, and then remove Front Bearing and Rubber Mount by hand or careful use of pliers.
Carefully pull out Pump Impeller and Magnetic Rotor.
Remove Rear Bearing and Mounting Bush by pushing firmly from behind with a flat-faced tool.
After cleaning all components: Check for wear of Bearings at either end of Rotor. Check for wear of keyway on Rotor or inside of Impeller. Check that one-way Arm moves freely. If not, carefully pull it out using a pair of tapered pliers and clean. Check cord and body of pump for any damage or deterioration and discard pump if suspected faulty.
Reassemble all parts in reverse order. Place Rear Bearing and plastic mount onto Magnetic Rotor before pushing firmly back into position. Whenever the Impeller Cover is replaced, make sure the Front Bearing and Rubber Mount are pushed squarely and firmly into position.
Whether you want to intall a water fountain or power your pond filtration system, our handy pond pump comparison chart will help you find the right pump.
Pumps run 24 hours a day and are the chief piece of equipment responsible for keeping your pond healthy. Selecting the correct pump is essential for a healthy pond. Here are some tips to help you pick the perfect pump.
Are you considering a waterfall or stream in your backyard, but don't know where to start? Creating a plan and having the right equipment goes a long way toward saving you time and money. These tips will help you get started.
Please note: Return of electrical equipment to Drs. Foster & Smith for exchange or refund is limited to 60 days from the date of purchase. Beyond 60 days, please contact the manufacturer for repair or replacement as covered by the manufacturer's warranty.
EMAIL ALERTS
Want to know if we drop the price on this item? SIGN UPfor an easy email alert!
What are Email Alerts? Learn here. You may end alerts at any time. | Manage alerts
Versatile multipurpose water pumps great for water fountains or driving pond filtration systems. Quality construction features superior rotor design and durable ceramic shaft bearings for years of trouble-free operation. Easy-to-clean, removable filter cage is less prone to blockage for reliable performance and convenient maintenance. Fish Mate submersible, solids-handling pond pumps feature a 2-way outlet with flow adjuster to control flow rate to suit your particular water fountain, waterfall or pond filtration needs. Barbed tubing connector allows convenient installation. All electrical parts are fully encapsulated. 
