TotalPond Low Water Shut Off Fountain Pumps

Ensure reliable performance without fear of pump damage due to low water levels. TotalPond Low Water Shut Off Fountain Pumps offer a smart solution for your fountains, spitters and water features. Patented sensor technology automatically turns the pump off when the water level is too low to prevent costly and potentially dangerous pump burnout. Normal pump operation resumes once water is added. Compact submersible pumps boast quiet, energy-efficient operation and fit comfortably concealed in most containers and fountain reservoirs.

TotalPond Low Water Shut Off Fountain Pumps are the perfect choice for fountains or water features near a windy, arid, or sunny area. 170 gph pumps are ideal for medium to medium-large fountains while the 400 gph pump is great for medium-large to large fountains. W/LED models include a 2-1/4" diameter x 2-3/4" high submersible LED light so you can enjoy your fountain both day and night!

Features

• Adjustable water flow control
• Low Water Shut-Off technology
• Silent pump design
• Energy efficient
• Suction cup mounts
• 6 foot power cord

Downloadable TotalPond Pond Aerator with LED Lights 170 gph Pump Only Manual PDF, TotalPond Pond Aerator with LED Lights 170 gph Pump w/LED Manual PDF, and TotalPond Pond Aerator with LED Lights 400 gph Pump w/LED Manual PDF.
(All require Adobe Acrobat Reader 4.0 or later - get it here for free)

Shop all Pond Water Pumps.

Please click "More Information" for assembly and installation instructions.

Preparation
Before beginning assembly or operation of product, make sure all parts are present. Compare parts with package content list and diagram. If any part is missing or damaged, do not attempt to assemble, install or operate the product.

• Estimated Assembly Time: Five minutes
• Tools Required for Assembly: No tools required

Assembly Instructions

1. Connect tubing to the outlet of the pump with the appropriate adapter. NOTE: Tubing is NOT INCLUDED.
2. Place the pump into water and connect to proper power source. Adjust flow control as required.

Care and Maintenance

• Regular cleaning of the pump may be necessary depending upon the environment in which it is operated. Clean the pump when it is visibly soiled or when a drop in performance is detected.
• Before cleaning, always disconnect the pump from the power source.
• Remove all parts from the pump and clean in warm water.
• Disassemble the pump cover and remove the impeller cover to expose the impeller assembly. Remove the impeller assembly by gently pulling on the impeller blades. Use a soft cloth or brush to clean the impeller assembly and the inside of the impeller housing.

170 gph Pump w/LED & 400 gph Pump w/LED
(Mfg# MD11170ASL) & (Mfg# MD11400ASL)

Preparation
Before beginning assembly or operation of product, make sure all parts are present. Compare parts with package content list and diagram. If any part is missing or damaged, do not attempt to assemble, install or operate the product.

• Estimated Assembly Time: Five minutes
• Tools Required for Assembly: No tools required

Assembly Instructions

1. Connect tubing to the outlet of the pump with the appropriate adapter. NOTE: Tubing is NOT INCLUDED.
2. Remove protective stopper on the low-voltage plug and connect the light to the pump by pushing the plug into the socket until it is firmly seated. Hand tighten the nut from the plug to the socket.
3. Place the pump into water and connect to proper power source. Adjust flow control as required.

Care and Maintenance - Pump

• Regular cleaning of the pump may be necessary depending upon the environment in which it is operated. Clean the pump when it is visibly soiled or when a drop in performance is detected.
• Before cleaning, always disconnect the pump from the power source.
• Remove all parts from the pump and clean in warm water.
• Disassemble the pump cover and remove the impeller cover to expose the impeller assembly. Remove the impeller assembly by gently pulling on the impeller blades. Use a soft cloth or brush to clean the impeller assembly and the inside of the impeller housing.

Care and Maintenance - Light

• Periodically, your light may require cleaning for optimal performance.
• Clean with warm water.
• The frequency of cleaning depends upon the conditions of the environment where the light is used.
• The light is designed to operate at temperatures between 41°F and 86°F.