TotalPond Container Fountain Kit with LED Lights

Everything you need to turn your favorite planter or pot into an eye-catching water fountain! Easy to assemble kit includes an energy-efficient pump, 3 fountainhead styles, and glowing ring of LED lights for added nighttime drama. What a perfect way to enhance your patio, deck, path, or entertaining space - and affordable enough to pick up a couple kits and create special themed fountains for weddings, charity events, or other special occasions. Included nozzle kit lets you vary fountainhead style and height. 4.37" x 5.22" x 8.39" high.

You can build a container fountain in 4 easy steps!

1. Fill any holes with the putty (included).
2. Place the pump assembly inside.
3. Fill planter with water, submerging the pump assembly.
4. Plug in, sit back and enjoy! You can also adjust nozzle to achieve desired effect.

For a sleek black design, create your Container Fountain using an inexpensive Pond Plant Container.

Kit includes:

• 170 gph energy-efficient pump
• Filter box
• 3 nozzle heads
• LED lighted ring for glowing effect

Features:

• Telescoping Nozzle Extension Tube extends from 5" to 9.25"
• Pump Assembly includes 170 gph pump, filter box, and LED ring for glowing effect
• 3 Nozzle Head options: Trumpet, Waterspray, or Waterbell

Please click "More Information" for Operation Instructions and Care & Maintenance tips.

1. Assemble the base plate, pump, filter block and filter cover.
2. Connect extension tubes to the pump using the supplied adapter.
3. Choose a fountainhead for the desired water effect, and assemble your choice.
4. Choose a container for your fountain kit.
5. If the container is not already watertight, use a plastic liner. Or if a clay pot is used, spray the inside of the pot with a clear acrylic sealant. Be sure to use a sealant that is safe for clay pots. Wait 24 hours for the sealant to dry before filling the container with water.
6. Test fit the assembled container fountain kit in the container. For installing the fountain with the pump cord over the side of the container, (recommended) proceed to step 9. For having the pump cord come out through the container wall, proceed to the next step.
7. Select a spot on the container wall that is the least visible from normal viewing for the cord exit. Create the hole, using a drill with appropriate bit capable of boring through the container material and large enough so the plug head can pass through.
8. Seal up the hole along with any other drainage holes in the container. Press plumbers putting into the hole and seal it with silicone caulk. Allow the sealant 24 hours to dry before filling the container with water.
9. Test fit the assembled container fountain kit in the container. Fill the container with water, 2/3 up to the top.
10. Connect the pump to a proper power source.

Care & Maintenance

• Regular cleaning of the pump may be necessary depending upon the environment in which it is operated. Clean the pump when it is visibly soiled or when a drop in performance is detected.
• Before cleaning, always disconnect the pump from the power source.
• Remove all parts from the pump and clean in warm, soapy water.
• Disassemble the front cover and remove the impeller cover to expose the impeller assembly.
• Use a soft cloth or brush to clean the impeller assembly and the inside of the impeller housing.