Pyramid Play Gym

Large wooden playstands offer medium to large birds the most climb, perch and play fun. Handcrafted hardwood construction is oversized, chew-resistant, and kiln-dried with carefully sanded components. Finely ribbed PVC perches and ladder rungs offer your bird a better grip, while laminated base makes cleaning easy. Boasts four side climbing ladders, large top perch, plastic climbing chain, fun swing (with metal hanging chains), two treat cups, and five perches that spiral around the center support post. Quick, simple assembly features recessed metal screws for added bird safety. Assorted colors.

Please click on "More Information" for product specifications, care instructions, and assembly.

Product Specifications: Made of oversized, chew resistant, kiln-dried hardwood that has been carefully hand-crafted and sanded with rounded corners. Parts wedge assemble with stainless steel pins and deeply recessed screws. PVC ladder rungs are finely ribbed for slip-resistant grips. Laminate base surface easily wipes clean with a soft cloth. Nontoxic and free of glue and chemicals. Assorted colors.

24" Rolling Base fits 24" and 32" wide play gyms/playstands.

Care Instructions: Laminated base and wooden components wipe clean with a damp soft cloth. For a more thorough cleaning use a solution of 1/2 cup bleach to 1 gallon of water. Thoroughly rinse and air dry before returning to your pet's environment. NOTE: Vegetable-based colors may run if they become wet. This is normal and safe for your bird.

Assembly Instructions: Easy-to-assemble design boasts recessed metal screw assembly for added safety. Before you begin, you will need the following tools (not included): Phillips Head Screwdriver, Pliers, and Hammer. NOTE: Do not fully tighten screws until all components and screws are in place. Ensure each screw is fully tightened, however, before exposing the play gym to your bird.

1. Fasten four Side Ladders to Flat Middle Base using eight Screws.
2. Insert each of the five Perches into the corresponding holes on the Center Post. Tap lightly with a hammer to secure in position.
3. Fasten the Center Post to the Flat Middle Base using one Wing Nut.
4. Fasten the Ladder Assembly to the Base using eight Hex Nuts. Hand-tighten all screws.
5. Fasten the Top Perch to the top of the Center Post using one Screw.
6. Attach the two Treat Cups to the Top Perch using one Wing Nut for each Cup.
7. Re-tighten all Screws and Wing Nuts before use.

1. Join the two Leg/Caster Assemblies using a Large Bolt and Wing Nut.
2. Fasten each of the two Top Cross Pieces to the Vertical Post with one Screw in each Post.
3. Fasten the Top Assembly to the Base Assembly using four Wing Nuts.