Featherland Series Cathedral Cage

When size matters, this stainless steel pet bird cage towers above the rest. It's the roomiest we offer, designed with full-size Macaws and large Cockatoos in mind. Generous interior keeps wings and long tail feathers intact and looking beautiful. It's the ultimate in cage safety, security, and convenience, with all-metal construction, corner welded panels and doors, and easy glide locking casters. No tools needed for quick and easy assembly. Available in Green or Stainless Steel.

Includes: 3 stoneware cups, 3 removable/locking cup holders, 3 natural wood perches (1 large perch which fits end to end, 2 smaller perches fit front to back), 4 removable feeding doors, 2 slide-out bottom grills and trays for convenient cage maintenance.
Cage Size:1-1/4" bar spacing with 5 mm wire; Inside: 48" x 32" x 62" high; Outside: 58" x 42" x 74" high.

Use Cage Liner #611792 for these cages.

Exterior Feeder allows even more interior cage space and easier feeding. Each sturdy rectangular stoneware dish, encased in a stainless steel frame with sliding polycarbonate cover, stays securely shut with a pin lock only you can open. Feeder measures 5" x 8" x 10" high overall; dish measures 4-1/4" x 6" x 2-3/4" high.
Simple Installation: Remove original feeder door. Insert the feeder frame into 4 holes in door opening, Slide clear polycarbonate shroud/cover into place Insert cup. A tamper-proof pin lock holds cover securely in place.

Downloadable Cage Assembly Instruction PDF.
Feeder Assembly Instruction PDF.
(Requires Adobe Acrobat Reader 4.0 or later - get it here for free)

Please click on "More Information" for cleaning and assembly instructions.

Use the mildest cleaning method on the cage that will do an effective job. Ordinary deposits of waste and fluids can usually be removed with soap and water. More stubborn deposits or stuck on food and debris may require harder rubbing or the use of commercial cleaning products acceptable for use on metal surfaces. Always rinse thoroughly with clear water and dry completely.

Frequent cleaning will prolong the service life of stainless steel cages and help maintain the finish. When using any cleansing agent, the rubbing should be in the direction of the polish lines or "grain" of the metal. For high luster finishes, clean soft cloths or pads should be used. If especially rough cleaning is necessary, use nylon or plastic type scrubbers, but first test these type of scrubbers in an inconspicuous area as they could mar or scratch a stainless steel finish. Never use ordinary steel wool or steel brushes on stainless steel surfaces. Minor scale build-up and some hard water spotting may be removed by washing with vinegar followed by a neutralizing rinse with clear water and thorough drying with a soft cloth.

IMPORTANT: Before using any chemical cleaning agent on your cage, review the label statements regarding use with metals. Always consult the manufacturer if there are any doubts.