Three of Seachem's most popular reef supplements in one package! Use Reef Calcium, bio-available calcium, to accelerate coral growth, Reef Strontium to provide bio-available strontium, and Reef Iodide to supply iodide for rapidly growing soft corals. Includes one 100 ml bottle each of Reef Strontium, Reef Iodide, and Reef Calcium.
Please click on "More Information" for directions of use.
|The Seachem Reef Pack Enhancer includes Reef Calcium, Reef Strontium, and Reef Iodide to enhance and accelerate growth in any reef system.
Hints: Use a calcium test kit to measure calcium. It is not necessary to exceed 380 mg/L total calcium when using this product. Color and clarity of Reef Calcium may vary between lots.
Guaranteed Analysis: Amounts per 1 g Calcium 50.00 mg min.; 52.00 mg max.
Advanced: Check strontium level, then follow dosing regimen above until strontium is adjusted to 8-12 mg/L. Each dose will raise strontium by about 0.6 mg/L. Size or frequency of dose can be adjusted. Thereafter, use as required to maintain strontium.
Expert: After determining the strontium consumption rate, set up a continuous drip system. Use the following formula to determine how much to add to your top-off water: m=0.4vs (m=mL of product to add to top off water, v=volume of tank in gallons, s=amount to raise strontium in mg/L). For example, if you want to raise strontium by 2 mg/L in a 50 gallon tank, then you would add 0.4x50x2=40 mL into the top-off water.
Hints: Always use a strontium test kit to measure strontium levels before beginning any supplement regiment.
Guaranteed Analysis: Strontium1.0 %
Beginner: Add 5 mL (1 capful) for each 200 L (50 gallons) every other day.
Advanced: Add 1 mL for each 80 L (20 gallons) daily to raise iodide by 0.10 mg/L. If necessary, adjust amount so that iodide reads 0.06-0.08 mg/L 6-12 hours after the last amount. Thereafter, use this amount daily and check iodide twice a month.
Expert: After determining the iodide consumption rate, set up a continuous drip system. Use the following formula to determine how much to add to your top-off water: m=0.5vi (m=mL of product to add to top off water, v=volume of tank in gallons, i=amount to raise iodide in mg/L). For example, if you want to raise iodide by 0.10 mg/L in a 50 gallon* tank, then you would add 0.5x50x0.10=2.5 mL into the top-off water.
Hints: It is normal for iodide levels to decline after a few days. This results from utilization and chemical depletion. Therefore, frequency of use will vary with different reef tanks. Dosing can be adjusted based on coral response. To check iodide levels use an iodide test kit.
Guaranteed Analysis: Amounts per 1 g Iodide 8 mg min.