Accessory for Hydor Wavemaker & Controllable Koralia 12V Pumps
Connects to Hydor Wavemaker & detects ambient aquarium lighting
Automatically reduces pump flow rate to low-flow night mode at night
Automate Night Mode function on your Hydor Koralia Wavemaker Controller. Hydor PME Photo-Electric Cell connects to Hydor Wavemaker Controller and detects ambient aquarium lighting to automate your connected Controllable Koralia 12V Pump(s). Detects nighttime aquarium light conditions and automatically slows down pump flow rate during the night and resumes set speed during the day. 78" long.
Please click on "More Information" for directions.
Using the supplied supports, position the Photo-Electric Cell so that it is illuminated by the lighting system of the aquarium. Plug the Photo-Electric Cell in your Hydor Wavemaker. When the illumination system turns off, the pumps will slow down to the minimum power. Once the illumination system starts again, your Hydor Koralia pump(s) will return automatically to the set program.
The Photo-Electric Cell is supplied already calibrated. Should it be necessary (in special illumination situations, such as with a strong light or a window close to the aquarium), the Photo-Electric Cell can be calibrated to the real conditions.
Please follow these simple steps:
Turn the Hydor Wavemaker completely off by positioning the switch on the back panel to the "O" (OFF) position.
Make sure that the Photo-Electric Cell is connected correctly to the Hydor Wavemaker and that it is well illuminated by the aquarium lighting system.
Turn the Hydor Wavemaker on by pressing the back switch to the "I" (on) position.
When the red LED on the front panel of the Hydor Wavemaker turns on, press the SET button - the red LED will start flashing.
Turn the aquarium lighting system on or to "daylight" setting.
Press the SET button again: The red LED will start flashing faster.
Turn the aquarium lighting system off, or to "nightlight" setting.
Press the SET button for the last time: the red LED will stay on for a moment and then the system will start working following the new calibration.
NOTE: Calibration was programmed so that you can first set either daylight or nightlight as you please. This means the above points E to G can be inverted. The Photo-Electric Cell cannot be calibrated unless connected to the Hydor Wavemaker.
FAQs Regarding the Hydor PME Photo-Electric Cell (Photo Sensor) Q. What is the Hydor PME Photo-Electric Cell? A. The Hydor PME Photo-Electric Cell is an accessory designed to automatically turn the pump(s) connected to the Hydor Wavemaker 2 and 4 down to the minimum level during the night. The electronic Photo Sensor is able to detect the intensity of the sources of light, ensuring the Hydor Wavemaker goes into Night mode. The photo sensor should be placed on the edge of the tanks (in open tanks), or near the lamps (in closed tanks).
Q.Does the Hydor PME Photo-Electric Cell come with the Hydor Wavemaker? A. No, the Photo Sensor is an optional accessory that can be purchased separately from the Hydor Wavemaker and the Koralia 12V pumps.
Q. Why is the Hydor PME Photo-Electric Cell useful? A. The Photo Sensor is necessary for the automatic activation of the Night mode of the Hydor Wavemaker 2 and 4. Using the Hydor Wavemaker, it is possible to program the automatic activation and deactivation times for the Night mode, setting the Photo Sensor as you prefer.
Do I have to calibrate the Hydor PME Photo-Electric Cell, or is it already calibrated?
The Photo Sensor comes already calibrated, but in particular light conditions. To calibrate it to the actual light conditions it is to be used in, follow the instructions provided.
If I do not have the Hydor PME Photo-Electric Cell, how can I set the Night mode?
If you do not have a Photo Sensor, you can set the Night mode manually, by pressing the SET key of the Hydor Wavemaker 2 module for about three seconds. To deactivate the mode, just lightly press the same key. If you have a Hydor Wavemaker 4 without a Photo Sensor, it is possible to set a special program with the pumps at the minimum level for a period of time decided on by the user.
An important component of a natural environment is water movement. Corals and invertebrates need irregular currents for both feeding and waste removal. Wavemakers have been developed to meet this need by imitating ocean currents in the aquarium.
A crucial - and often overlooked - aspect of keeping a reef aquarium is water movement. Proper water movement goes a long way toward helping a reef system thrive. Corals and other reef inhabitants are accustomed to rapid, constant water movement.
Water current is essential to nourish and feed your aquarium's inhabitants, as well as clean and regulate your aquarium's water. In addition, poor water movement hinders biological filtration, which in turn, raises toxins to dangerous levels.
Don't take the quality of your tap water for granted. If you draw your water from a well, nature may not be providing you the perfect balance. If you are using tap water from your municipal department, it likely includes minerals and additives.
Please note: Return of electrical equipment to Drs. Foster & Smith for exchange or refund is limited to 60 days from the date of purchase. Beyond 60 days, please contact the manufacturer for repair or replacement as covered by the manufacturer's warranty.
Want to know if we drop the price on this item? SIGN UPfor an easy email alert!
What are Email Alerts? Learn here. You may end alerts at any time. | Manage alerts
Italian-made axial rotor stream pump for fresh- &
saltwater aquariums Generates beneficial aquarium water movement - wide turbulent flow Enjoy reliable aquarium use backed by a 3-year manufacturer warranty Feature-loaded Italian stream pump delivers beneficial water movement in style. ...
Aquarium circulation pumps redesigned for extremely quiet operation
Boost aquarium water movement with greater efficiency & less noise New Gyre Mode generates impressive aquarium water movement Professional grade circulation pumps feature a newly designed driver for an overall performance ...
Easily create strong, beneficial wave action in your
freshwater or saltwater aquarium Compact, easy-to-install attachment powered by water pressure won't raise energy costs Simply connect to your canister filter outlet hose or your aquarium pump/powerhead Easily create strong, beneficial ...
Italian-made ultra compact 530-gph aquarium water circulation pump
Delivers high flow rates without taking up valuable aquarium space Self-cleaning impeller ensures extended use between maintenance Uncompromising Italian-made circulation pump boasts extreme energy efficiency and compact size without sacrificing ...
Turn powerheads into a turbulent water movement generator
Instantly create beneficial water movement in any aquarium Random circular wave patterns replicate natural ocean tides Create random, turbulent currents without additional electricity. Innovative Marine Spin Stream is the "must-have" accessory ...
*Sitewide savings excludes all prescription products and certain manufacturer items not eligible for promo offers and coupons (as indicated on product pages). FREE economy ground shipping on all orders - no minimum ends Friday, Nov 27, 2015 @ 11:59 pm (CST). See full shipping rates here.