Hydor Koralia Controllable Pumps & Wavemakers

Innovative wave-making system harnesses the power of Koralia submersible pumps. Enjoy the reliable performance of Koralia water circulation pumps and the flexibility and control of a wavemaker. The Koralia Wavemaker* is a dedicated system that accepts up to two or four, low-voltage Koralia Controllable Pumps of any model. Expands custom options for outstanding water movement in aquariums of all sizes. Timer-controllable alternating or synchronous flow modes recreate natural wave or tidal effects. Adjustable flow rate fine-tunes water movement to satisfy the needs of your aquarium and its inhabitants. Use optional Night Mode Photo Sensor to automate wavemaker Night Mode. Koralia Controllable Pumps require Koralia Wavemaker Pump Controller for operation. Koralia Magnum Controllable Pumps generate powerful, wide spread water stream ideal for larger reef aquariums with SPS corals. Connects to the Koralia Wavemaker 4-way Deluxe and 2-way Basic** for greater water movement that you can control.

*Basic Koralia Wavemaker controls up to 2 Koralia Controllable Pumps of any model.
*Deluxe Koralia Wavemaker controls up to 4 Koralia Controllable Pumps of any model.

Hydor Koralia Controllable Pumps
Features:

• Unique Patented Magnet + Suction Cup Support - Makes positioning Koralia pumps easy and safe anywhere in your aquarium.
• Adjustable Flow Direction - Articulating ball joint allows a full, 360-degree range of convenient pump position.
• Gentle or Powerful Flow - Choose between wide and gentle flow or use the concentrator nozzle for powerful and direct flow.
• Low Voltage Safety - All Koralia Controllable pump models have super safe, rubber cords with waterproof connectors that plug into the Koralia Wavemaker control system.
• Propeller-shaped Rotor - Provides superior performance and exceptional flow rate.
• Very Low Power Consumption

Hydor Koralia Wavemaker Pump Controller
Features:

• Alternating Flow Mode - Switches between multiple Koralia Controllable Pumps to recreate wave or tide effects.
• Synchronous Flow Mode - Pumps operate simultaneously at minimum or maximum flow setting and can be set to on/off mode to create strong tidal effects.
• Food Mode - Puts pumps on "Hold" for 5 minutes for convenient feeding of fish and invertebrates.
• Manual Night Mode - In this mode the pumps can be slowed down during the night. Resumes set speed during the day.
• Cooling Fan - Super quiet cooling fan that regulates its speed as necessary.

**Compatible only with Second Generation Koralia Wavemaker 2-way Basic that is identified by a yellow label on the outer packaging and by a stripe on the inner packaging.

Please click on "More Information" for directions for use.

Please note: Koralia Controllable Pumps are a precision piece of aquarium equipment and will only work with Koralia Controllers. We will not accept, credit, or replace altered Koralia Controllable Pumps.

• Position the desired number of Hydor Koralia Controllable Pumps (any controllable model - Nano, 1, 2, 3, or 4.) in the aquarium. Make sure the Koralia Controllable Pumps are completely underwater to prevent potential harm to aquarium inhabitants or splashing water.
• Apply the Anti-Electromagnetic Interference Magnet on the pump cords.
• Apply the Anti-Slip Supports on the bottom of the Koralia Wavemaker Controller.
• Connect the pumps to the Koralia Wavemaker Controller, making sure that the connectors are inserted properly in the slot and the terminals click into place.
• Connect the Koralia Wavemaker Controller to the power supply.
• Turn on the Koralia Wavemaker Controller by bringing the On/Off switch to the "I" position.
• Moments after the Koralia Wavemaker Controller is turned on, the controller will carry out standard systems check (approximately 15 seconds) to make sure that all components are ready. All LEDs will light up and pumps will start at the "Alternate Flow" mode.
• Set the Koralia Wavemaker Controller to better suit the needs of the aquarium by turning the Pulse/Flow/Timer knob and the "minimum" and "maximum" flow power knobs. Make sure the "minimum" and maximum" are never set equal. The "maximum" power should always be more than the "minimum" power setting.

Alternate Flow Mode
When turned on, the Koralia Wavemaker Controller starts automatically in the Alternate Flow Mode. Each pump starts one at a time at maximum power and then follows the program set by the hobbyist. Interval between alternating times can be from a minimum of 2 seconds to a maximum of 6 hours. Switching time between the two pumps is 0.5 seconds.

Synchronous Flow Mode
To set the Synchronous Flow Mode, press the SET button on the front panel for 10 seconds. After a few seconds, depending on the set minimum and maximum power, the pumps will start together at maximum flow and then, both at the same time they will slow down. If the mode is set properly, the following visual signal appears:

• Red LED under the SET button of the Wavemaker turns on.
• The Red LED will then turn off.
• The 2 Blue LED lights above the pump connections turn on.

To return to the Alternate Flow Mode, press the SET button for 10 seconds or reset the Wavemaker by turning it off (switch on back panel).

Food Mode
When feeding fish and especially invertebrates, it is advisable to set the pumps on "Hold." To set this mode, simply press the SET button briefly until you hear a click. The Blue LEDs indicate the pumps are on minimum power while 2 quick flashes indicate the unit is in the Food Mode. The pumps will remain in the Food Mode for 5 minutes. To end the Food Mode before the default 5 minutes are up, simply press the SET button. The pumps will go back to the previously programmed mode.

Night Mode
Many hobbyists prefer more gentle water movement in reef aquariums during the night. The Koralia Wavemaker Night Mode can be set manually to switch pump function to minimum power. To set manually, press SET button for approximately 3 seconds. The Red LED should turn on to indicate Night Mode function. To turn off the program, press the SET button briefly.

Maintenance
The Koralia Wavemaker does not require any particular maintenance procedure, but it is advisable to clean the unit and the area around it from dust and any other debris to prevent any potential malfunctions.