Complete conditioner for both marine and freshwater use
Safely condition water without a pH drop or overactivating protein skimmers
Provides essential ions and stimulates natural slime coat
No other aquarium water conditioning product is required to make tap water safe. Prime removes chlorine and chloramine (even in high chloramine levels), and detoxifies ammonia and nitrite. Provides essential ions and stimulates natural slime coat. Prime also detoxifies any heavy metals found in the tap water at typical concentration levels. When used during cycling, Prime enhances nitrate removal and does not cause a pH drop or overactivate protein skimmers. Great for setting up new aquariums, or when adding or changing water, or to remove nitrate. Use 1 ml for each 10 gallons of water. For freshwater or saltwater use. 100 ml treats 1,000 gallons; 250 ml treats 2,500 gallons; 500 ml treats 5,000 gallons; 2 liter treats 20,000 gallons.
Please click on "More Information" for ingredients and directions for use.
Directions for Use:
Use 1 capful (5 ml) for each 50 gallons of new water. For smaller doses, please note each cap thread is approximately 1 ml. This dose removes approximately 0.6 mg/L ammonia, 3 mg/L chloramine, or 4 mg/L chlorine.
May be added to aquarium directly, but better if added to new water first. If adding directly to aquarium, base the dose on aquarium volume. Sulfur odor is normal. For exceptionally high chloramine concentrations, a double dose may be used safely.
To detoxify nitrite in an emergency, up to 5 times normal dose may be used. If temperature is > 86°F and chlorine or ammonia levels are low, use a half dose.
Principal Ingredients: Bisulfites and hydrosulfites, aqueous solution, buffered at pH 8, with ameliorating ingredients. Reducing agents.
Frequently Asked Questions regarding Prime: Q. My Prime smells like it went bad, is it ok to use it?
A. Yes. While Prime has a very distinct odor that is similar to sulfur, this is completely normal and does not affect the performance of the product. The presence of small black specks is also normal.
Q. I am using Prime to control ammonia but my test kit says it is not doing anything; in fact, it looks like I added ammonia, what is going on?
A. To avoid false readings of ammonia, use Seachem's MultiTest Ammonia kit (item #901231). It uses a gas exchange sensor system that is not affected by the presence of Prime or other similar products. It also has the added advantage that it can detect the more dangerous free ammonia and distinguish it from total ammonia (which is both the free and ionized forms of ammonia (the ionized form is not toxic).
Instantly removes chlorine, chloramines and neutralizes heavy metals
Helps replace the natural slime coating fish need in times of stress Our best selling aquarium water conditioner! Improves water quality: Tap water usually contains chlorine, chloramines and heavy metals harmful ...