Refill packets for the Hagen CO2 Natural Plant System
Fresh Activator and Stabilizer packets ensure proper CO2 production
Provides a steady supply of CO2 for lush freshwater planted aquariums
Keep your Hagen CO2 Natural Plant System running at peak performance.
Activator and Stabilizer Packets
Replacement Activator and Stabilizer Packets ensure steady CO2 production for healthy aquarium plants. Easy-to-use replacement packets produce CO2 through natural fermentation process and supplies CO2 for up to 28 days.
Please click on "More Information" for replacement instructions for Activator and Stabilizer Packets.
Replacement Instructions for Activator and Stabilizer Packets When the fermentation process is finished (up to 28 days), proceed as follows:
Remove CO2-resistant tubing and cap of your CO2 Natural Plant System.
Dispose of contents as desired (contents are 100% biodegradable).
Thoroughly rinse out fermentation canister and cap. Do not use soap or detergent.
Add white table sugar (no other substitute) to the first level indicator inside the canister. Add full contents of one Stabilizer Packet.
Add full contents of one Activator Packet.
Add lukewarm water (68°-86°F/20°-30°C) to the second level. Do not use aquarium water. Stir contents gently for faster activation.
Replace cap. To close, turn counterclockwise once to align the threads, and then proceed to close by turning clockwise. IMPORTANT: To prevent CO2loss, turn cap clockwise until initial resistance is met and then tighten securely with an additional quarter turn.
NOTE: Once the fermentation is complete, the air tube may become filled with water through thermal conditions. While servicing the unit, make sure that the air tube is fully emptied of water by raising it above the aquarium water level or by blowing into it. This will ensure that no aquarium water inadvertently leaks outside of the aquarium while servicing is taking place.
How to Maximize the Benefits of CO2 Injection
The CO2 Natural Plant System relies on the natural process of fermentation to produce carbon dioxide. Maintain an ambient temperature range of 70?-80?F (21?-27?C) - for optimum results 68-72 ?F (20-22 ?C).
Install power filter outputs so that the aquarium water surface is not excessively agitated. The greater the water surface turbulence, the faster the rate of carbon dioxide will leave the aquarium. Ensure that there is just enough water surface movement to satisfy the oxygen requirements of fish, demonstrated by natural behavior and breathing.
Test pH and KH regularly. It is recommended to perform a pH test prior turning lights on and off. The pH value range will often increase as buffering capacity (KH) decreases and/or plant population increases. Always use a pH Stabilizer to replenish buffering capacity (KH). It is a good source of bicarbonates (source of carbon energy) for some plants and nitrifying bacteria.
Maintain aquarium light intensity by cleaning deposits regularly. It is recommended to clean fluorescent tubes on a weekly basis and replace them at least annually.
The Effects of CO2 Injection
Carbon dioxide is the most easily assimilated carbon source for plants. Approximately 40% to 50% of dry weight composition of a plant is carbon. Through the invigorated growth of aquatic plants, the aquarium owner can expect a higher degree of water quality.
CO2 injection benefits fish due to improved water quality, and also provides a safe and gradual method of reducing pH values. Many aquatic plants thrive in mildly acidic pH ranges, and suitable species of fish for planted aquariums often prefer these water conditions.
The two basic requirements for healthy aquarium plants are light and proper carbon dioxide levels. Installing a CO2 system is essential to prevent low CO2 levels and to maintain active plant growth. Learn more here.
Every organic molecule of every living organism is predominantly carbon based. Given this simple fact, it becomes clear why carbon dioxide plays a pivotal role in the planted aquarium. Greg Morin, President/CEO, Seachem Laboratories, Inc. explains.
Semi automatic CO2 injection system helps keep plants
gorgeousIdeal for planted freshwater aquariums up to 200 gallonsEasy to assemble and use semi automatic CO2 injection system This economical semi automatic CO2 injection system is ideal for keeping plants lush ...
Continuous in tank CO2 indicator for freshwater planted
aquariums Simple colorimetric results display aquarium carbon dioxide levels Indicates aquarium CO2 levels for 3 weeks before needing reapplication Constantly monitor carbon dioxide levels in live planted aquariums with ease. Azoo ...
> Comprehensive plant supplement for freshwater planted aquariums
Liquid aquatic plant supplement contains a rich assortment of nutrients Provides micro elements and trace elements beneficial to aquatic plants Flourish? Comprehensive plant supplement with essential trace elements, vitamins, and amino ...
Liquid trace element supplement for freshwater planted aquariums
Replenishes trace elements necessary for healthy aquarium plants Simplifies supplementation of trace elements for lush plant growth >An excellent source of important trace elements for aquarium plants. Replenishes important trace elements ...