Current USA PowerPaq Series HQI Double Ended Metal Halide Bulbs

Double-ended replacement bulbs recommended for use with the Ocean Light HQI Metal Halide Pendant Lights, and Outer Orbit HQI/Compact Fluorescent/Lunar Fixtures.

Handle bulb by socket end only, DO NOT touch bulb.

Available in:
70-watt 14000°K
150-watt 10000°K
150-watt 14000°K
250-watt 10000°K

Please click on "More Information" for further details and safety precautions.

Metal halide lamps produce the most concentrated, most intense light of any type of artificial lighting. They are ideally suited for deep freshwater planted aquariums and saltwater reef aquariums containing light-loving corals such as SPS (small polyped stony) and LPS (large polyped stony) corals and invertebrates including Tridacna clams and others. A spectacular desirable effect of metal halide lighting in your aquarium is the "glitter effect," which replicates the effect of surface waves reflecting on a reef in a natural environment.

HQI systems are relatively new to the hobby and offer many of the same features as conventional metal halide systems, but differ in design. The bulb is much smaller than screw socket halides and is double ended. Many of the ballasts for the metal halides can also be used for HQI fixtures. The HQI bulbs, however, require a system-specific socket. Wattage selections for HQI bulbs are commonly available in 150- and 250-watt bulbs.

Tip from our Techs
What watt do I need?
150W - 175W: up to 20" deep or mixed corals with a few SPS (small polyped stony) and clams placed high in aquarium.
250W: up to 30" deep with mixed corals including SPS (small polyped stony) and clams.
400W: up to 48" deep or a dedicated SPS (small polyped stony) and clam aquarium.

Metal Halide Bulb Safety and Handling

• Metal Halide discharge lamps should only be operated in enclosed fixtures with ultraviolet absorbing glass filter (protective lens). Failure to do so may cause serious skin and eye inflammation. Do not use these lamps in any fixtures where any unfiltered light is emitted from the fixture. Do not operate these lamps if the ultraviolet absorbing filter glass is broken or uninstalled.
  
  
• Metal Halide discharge lamps should only be operated in enclosed fixtures that safely contains all lamp parts in the event of a lamp burst or rupture. These lamps operate at a high internal pressure and at high temperatures. A lamp burst may occur, causing physical injury and property damage.
  
  
• Metal Halide lamps should never be operated beyond their rated useful life. The risk of a lamp burst increases with lamp age, temperature, improper operation, and improper handling.
  
  
• Never bump, drop, apply excessive stress, or scratch the lamp. This could cause the lamp to burst. Do not operate any lamps with any traces of scratches, cracks, or physical damage.
  
  
• Never operate a lamp above or below its rated current or voltage. This could cause the lamp to leak or burst. Only operate lamp with compatible ballast and fixture.
  
  
• Always turn off the electrical power before inserting, removing, or cleaning the lamp. Avoid touching the lamp with your bare hands and be sure to wipe off any fingerprints with a clean lint-free soft cloth. Debris or oils left on the lamp can damage the lamp as the lamp heats up.
  
  
• Electrical connections should be clean and in good condition.
  
  
• Replace the lamp holders and sockets when needed.
  
  
• Affix the lamp securely in the socket. Improper installations will cause arcing, overheating, and shorten life to lamp and socket.
  
  
• Never touch the lamp when it is on, or soon after it has been turned off, as it is hot and may cause burns. Lamps should be allowed to cool for a minimum of 10 minutes after the lamp is turned off.
  
  
• Do not use lamp in close proximity of paper, cloth, or other combustible material that can cause a fire hazard and never expose operating lamp to moisture.
  
  
• Do not look directly at the operating lamp for any period of time, This may cause eye injury.
  
  
• Metal Halide lamps require several minutes of warm-up time to come to full brightness and color.
  
  
• Shut down period of 15 minutes per week is recommended for optimum lamp life.