Red Sea MAX S-Series Reef Systems

Amazing aquarium systems boast integrated components to streamline care of even the most delicate SPS corals. The Red Sea MAX S-Series Reef Systems eliminate complicated equipment selection and compatibility issues so you can focus on the beauty of your coral reef setup. These outstanding and inclusive package kits are fully equipped with a glass aquarium, sump-style reef filtration system, powerful return pump, 530 gph circulation pumps, C-Skim 1800 protein skimmer, mechanical and carbon filtration media and internal piping with standard union connectors. Included cabinet stand boasts an anodized aluminum frame for superior structural support and corrosion resistance. All external surfaces use weather-resistant polyurethane paints (similar to those used in the car industry) for an elegant and durable finish. Assembly required.

Brilliant reef illumination is provided by an innovative 10-lamp slide and swivel T5 light fixture made up of three individually switched lighting units. Identical front and rear T5 units (four lamps each) are hinged to the lighting chassis that slides across the top of the aquarium, providing total access for all maintenance and reefscaping tasks. Center unit features two additional T5 lamps plus LED moonlight. Electrical components are routed to an integrated power center with two analog timers for safe and convenient operation. Power Center features 10 individually switched power sockets for manual ON/OFF control. Comprised of three individual power strips equipped with a resettable thermal circuit breaker, the Power Center allows independent servicing without disrupting function of the other power strips.

Features

• Max S-Series Glass Aquarium: 12-15mm ultra clear (low iron) glass affords beautiful views of aquarium inhabitants.
• Sump-Style Reef Filtration System: Compartmentalized glass sump with low-density sponge filter media, 20 oz high-grade activated carbon, and float valve for integrated water top off system.
• Integrated Water Top Off System: Easy access reservoir (storage tank) for RO water automatically replenishes evaporated water levels to ensure proper sump return pump function.
• Sump Return Pump: Powerful submersible pump returns water to the aquarium and a regulated portion of the flow is provided for the C-Skim 1800 protein skimmer.
• C-Skim 1800 Protein Skimmer: Advanced protein skimmer provides efficient, long-term pollutant reduction for superior water quality.
• Mechanical and Carbon Filtration Media: Included low density sponge filter media trap debris while grade activated carbon removes dissolved pollutants for cleaner, clear aquarium water.
• Internal Piping: Features standard union connectors and flow control valve for simple installation and adjustments.
• Full Width Surface Skimmer & Mid-level Flow Holes: Built-in surface skimmer draws water along the entire width of the aquarium and into the rear chamber that houses the downpipe and circulation pumps. Mid-level Flow Holes draw water from the middle of the aquarium to improve water circulation.
• Downpipe System: Silent flow downpipe system features a flow-regulated main downpipe and a secondary overflow pipe to accommodate water flow to the sump.
• Circulation Pumps: Discretely concealed 530 gph rear-circulation pumps with adjustable directional nozzles ensure proper water movement for corals.

Assembly required.

Please specify White or Black.

Downloadable Red Sea MAX S-400-S-500 Installation and Operation Manual PDF, Red Sea MAX S-650 Installation and Operation Manual PDF, and Red Sea MAX S-Series Specifications PDF.
(Requires Adobe Acrobat Reader 4.0 or later - get it here for free)

Shop all Aquariums.

Please click "More Information" for installation instructions and tips.

Weight
The MAX-S aquariums are supported by 9-12 adjustable feet (depending on model). The flooring directly below the legs must be rated for a static loading of at least 15 kg/cm2 (220 lbs/square inch).

Room Temperature
Site selection is important for correct temperature maintenance. We recommend that you keep the ambient room temperature a comfortable and stable 22°C / 72°F. Avoid placing the tank in front of an air conditioner, heating vents or direct sunlight. A well-ventilated room with moderate light is the best place to position the aquarium.

Accessibility

• Back: Ensure that there is at least 15cm / 6" of clearance behind the MAX to allow for operation and maintenance of the flow valve on the main downpipe as well as sufficient air circulation for a chiller.
• Sides - Rear: Ensure that there is sufficient room (approximately 60cm/24") between both sides of the aquarium and any adjacent walls or furniture for access to the rear of the tank. In addition to the regular maintenance of the surface skimmer, pumps and return flow vents of the rear chamber, specific access is required as follows: Left side - filling of Top-up water reservoir, installing/removing cables to power drawer. Right side - adjustment and maintenance of down-flow valve.
• Sides - Front: Ensure that there is approximately the length of the tank free on at least one of the sides. This is to enable the installation/replacement of the color trim on the tank as well as being able to replace the tubes in the front and rear light units without having to remove it from the aquarium.

General Considerations
Ensure that the area surrounding the aquarium is waterproof and consider moving away anything that water might damage or be corroded by the salt.

Assembly

Tools
The assembly requires the following tools:

• Adjustable torque Power Drill/Driver (at least 12V) with a crosshead bit on a 5cm/2" extension. Do not use an impact power driver
• Regular crosshead and flat screwdrivers
• Rubber mallet
• Spirit level (at least 60cm/2')

Components

• The MAX-S system includes the following main components:
• MAX-S type glass aquarium with integral top-up reservoir
• Cabinet (self-assembly)
• MAX-S T5 lighting unit
• Power Center
• Glass Sump including Filter sponges, Carbon media and Float valve for automatic top-up
• Internal Piping
• C-Skim 1800 Protein Skimmer
• Main return pump (size according to model)
• Circulation pumps (number according to model)

Cabinet Assembly
WARNING: If you are not experienced in the construction of self assembly furniture, seek suitably qualified assistance.

The parts of the frame are connected by screwing self-tapping screws through the corner brackets into pre-drilled holes in the aluminum profiles. This is best achieved by using a power drill with an adjustable torque. It is necessary to apply pressure when screwing self-tapping screws into aluminum. To ensure that all screws of the frame are properly seated, the manual shows turning the frame around during the various stages of assembly so that pressure can easily be applied by screwing downwards while the parts are supported by the floor.

When screwing into plastic parts such as the aquarium baseboard or the lower front plinth, use a hand screwdriver and not the power driver.

The adjustable feet on the bottom of the cabinet enable the system to be leveled irrespective of the flatness of the floor. When assembled the height of the feet can be adjusted so that the bottom edge of the side panels will be 6-12mm (1/4" - 1/2") above the floor. Initially assemble the four corner feet to the highest position and all other feet to be touching the stainless steel footplates.

Placing Aquarium
Before placing the aquarium in its operating position, familiarize yourself with top-off reservoir outlet, main pump and down pipe connections and the flow control valve that are located at the back right corner of the aquarium. Once the system is in its operating position approximately 15cm (6') from the wall, the valve and connectors are accessible from the side.

WARNING: Lifting the glass aquarium onto the cabinet will require at least 4 people. The top of the cabinet is approximately 92cm/36" from the floor. The table shows the approximate weights of the different models of MAX-S aquarium. Ensure that anyone lifting the aquarium is physically suitable for such an operation and has been instructed in the correct methods of lifting heavy objects.

• Aquarium must be lifted from the bottom.
• Take care not to damage the plastic rim on the front and sides at the top and bottom of the glass. Some damage to the rim will not affect the assembling of the external color trim.
• Before lifting aquarium, place the assembled cabinet in the final operating position (see location above) and set the glass aquarium in position on top.
• The back of the glass should be flush with the rear edge of the cabinet top board. The front and sides of the glass should protrude slightly beyond the edges of the cabinet board such that the protrusion is approximately even on both sides. Incorrect positioning of the aquarium on the cabinet will interfere with the assembly of the color trim.
• Once the aquarium is correctly aligned with the cabinet, check that the cabinet has not moved. If necessary, readjust the position of the cabinet.