Large capacity media reactor for DrTim's Aquatics NP-Active Pearls
Gently tumbles NP-Active Pearls to optimize nitrate & phosphate removal
Acrylic filter media reactor made in the USA for reliable aquarium use
Heavy-duty acrylic media reactor perfect for DrTim's Aquatics NP-Active Pearls . The DrTim's Aquatics Bashsea Pellet Master 1 Reactor features a large reaction chamber designed to handle a high media volume. Easy-to-set-up reactor boasts true O-ring seals and keyhole flanges for no-leak installation. Non-clogging design provides even water flow to tumble gently media for maximum media-water contact. DrTim's Aquatics Bashsea Pellet Master is designed and hand crafted in the USA using 100% American-made acrylic. Pump, 1/2" tubing and NP-Active Pearls required for operation, each sold separately.
Holds up to 225 ml of NP-Active Pearls enough for a 75-gallon aquarium.
Please click on "More Information" for instructions.
Instructions for DrTim's Aquatics Bashea Pellet Master I, II & III
Start with 1/3 the normal amount of DrTim's Aquatics NP-Active Pearls. For example, if your aquarium is 60 gallons and the normal amount of NP-Active Pearls is 3 ml per gallon, then use 60 ml of NP-Active Pearls or a volume of about 2 oz of NP-Active Pearls (1/3 of 180ml ((3ml x 60 gallons)) = 60 ml).
To add the NP-Active Pearls to the DrTim's Aquatics Bashea Pellet Master Reactor:
Loosen (but do not remove) the Black Bolts on top of the reactor.
Press down on the top and turn so the large holes in the Blue Plate line up with the top of the bolts. Then remove the Top.
Reach in and remove the Screen.
Pour the NP-Active Pearls into the reactor and then replace the Screen.
You can now fill the reactor with some water to the level of the Screen.
Now replace the Top, making sure the O-ring is positioned correctly.
Carefully tighten the bolt snug but do not over-tighten.
Place the reactor near your tank or sump.
Slip 1/2" ID tubing (3/4" if using PM-III) over the output fitting of the powerhead or water pump. You may have to warm the tubing under hot water to make the tubing more pliable. Position the powerhead or water pump in the tank/sump and then stretch the tubing over the reactor.
Carefully cut the tubing to the needed length and slide the end over the fitting on the top of the reactor labeled "IN."
Take another piece of tubing and slide the end over the fitting on the top of the reactor labeled "OUT."
Run the tubing over to the tank/sump and position it so the tubing will not fall out of the tank/sump when the water is turned on.
Plug in the powerhead or water pump and check for any leaks. There may be some air bubbles trapped in the reactor but don't worry, they will clear out on their own.
After four weeks, add another 1ml of NP-Active Pearls per gallon to the reactor. Repeat after eight weeks to achieve the full-recommended amount of NP-Active Pearls of 3ml per gallon.
The single most annoying problem in your aquarium is likely the ongoing battle against algae. Left unchecked, it can cover the glass making viewing impossible. Read how controlling phosphate plays a role in controlling algae in aquariums.
The presence of algae is a normal part of keeping an aquarium. However, aggressive algae growth is a good indication that your system is out of balance. Use chemical filter media to remove excess nutrients that help algae thrive.
One of the easiest ways to eliminate poor water conditions is to remove pollutants from the aquarium water. Removing phosphate and other pollutants in aquarium water will also effectively reduce many of the nutrients algae needs. PhosPure can help.
Phosphate and silicate remover for fresh and saltwater
aquariums Rapidly lowers phosphate levels to boost aquarium water quality Permanent removal - will not release phosphate into your aquarium Improve aquarium water quality with rapid, permanent removal of phosphates and ...
Patent-pending formula removes dissolved phosphate in minutes PhosBuster
Pro is effective in marine & freshwater aquariums Improve water quality for healthy aquarium inhabitants including corals Instant phosphate remover for "dose and forget" phosphate management. Patent-pending PhosBuster Pro rapidly removes ...
Liquid carbon complex safely & naturally prevents nuisance
algae in coral reef aquariums Microbiological nutrient reduction provides fine control of zooxanthellae population Biological nitrate and phosphate reducer for use in saltwater marine aquariums Control nutrients that fuel aggressive algae ...
Chemical filter media scientifically proven to reduce phosphate
and silicate Effectively removes phosphate to help reduce aquarium maintenance caused by excess phosphate Provides long-lasting phosphate control in fresh or saltwater aquariums A specialized, synthetic adsorption filtration media that selectively ...
Decorative filter media adsorbs and traps aquarium phosphate
and nitrite Simple and natural-looking way to keep your aquarium crystal clear and odor free Adsorption resin provides up to 2 months of effective chemical filtration Control aquarium phosphate levels in ...