3-step, bypass-free construction ensures optimum aquarium filtration
Anti-overheating design protects motor if filter gets clogged
Reliable priming method for easy-start operation
Versatile, high performance aquarium canister filter loaded with convenient features. Height-adjustable inlet and customizable outlet system with venturi, and outlet nozzle allow this filter to work efficiently on any type of aquarium. Flow control is above tank level for easy accessibility. Anti-overheating design protects motor if filter gets clogged. Enjoy reliable performance, strong flow rates and trouble-free aquarium filtration with FilStar XP Canister Filters.
FilStar XP Canister Filters includes Bio-Chem Zorb, an exclusive research-grade resin-carbon blend that removes compounds that carbon alone cannot remove, to make aquarium water clean and clear. Very quiet and powerful three-stage canister filter features filtration baskets with handles allowing easy replacement of media. Extra-large basket chambers provide ample space for additional bio media such as Bio-Chem Stars or specialized media. 2-year manufacturer's warranty.
Replacement Rotor/Impeller Assemblies available.
Please click on "More Information" for instructions for use and product specifications.
Included in each FilStar XP:
Height-adjustable inlet with extension pieces and strainer
Customizable outlet system with venturi, flow adjustment and outlet nozzle
Suction cups for attaching all outlet and inlet tubes
Filtration basket(s) with separation grid(s) for filter media
Flexible inlet and outlet tubing (2 x 5 ft)
20 ppi open-cell foam(s) - removes coarse debris
30 ppi open-cell foam(s) - removes finer particles
Micro-filtration pad - for ultra-fine filtration
Bio-Chem Zorb pouch - for removal of organic waste
Complete instructions with toll-free technical assistance
Adjustable height inlet tube, fits even the deepest aquariums
Modular outlet system adjusts to any aquarium
160 degree rotation of inlet/outlet nozzles
Easy to Use
Self-priming, easy start system
Unique one-step water shut-off and disconnect control lever
Easily accessible flow control from above tank level
Bypass-free construction ensures complete filtration
Maximum capacity baskets hold large amounts of filtration media
Efficient 3-stage filtration: mechanical, chemical, and biological
Long-life shaft will not degrade, even in saltwater
Unique antiairlock system ensures continuous flow
Self-locking water shut-off system prevents accidental flow during maintenance
Rubber feet prevent slipping and dampen noise and vibration
Barbed nozzles and safety clips (included) ensure a watertight connection
Anti-overheating design protects motor if filter is clogged
If you need replacement/additional instructions, please contact Aquarium Pharmaceuticals at www.aquariumpharm.com.
Installation Quick Guide
Before you begin
Make sure the filter is positioned between 24" (min) and 55" (max) BELOW the water level of the aquarium. The filter will need to sit on a level surface. Take a look at your aquarium and decide where you want to place the inlet and outlet pipes and the FilStar Canister Power Filter. Make sure the hoses will be long enough and won't be stretched after installation.
STEP 1 Check the Parts
Lay out all of the parts and make sure nothing is missing or damaged. Keep the Inlet & Outlet Parts separate.
Assemble the Inlet Pipe
Assemble the Outlet Pipe
Mount the Inlet & Output Assemblies, using the suction cups to hold them in place.
Set up the Venturi Valve on the Outlet Pipe Assembly.
STEP 6 Set up the Canister Filter
Remove the Blue Motor Housing by releasing the four Canister Clips and remove the Media Basket(s). Inspect the contents making sure to remove the plastic bag from any media that was shipped wrapped in plastic. Stack the Media Basket back in the Canister Base. Make sure they are stacked straight and that the top Basket Lid has the raised circle facing up. Replace the Blue Motor Housing and secure the four clips to seal it to the base.
Measure the Flexible Tubing to be attached to the Inlet & Output Assemblies. Cut the tubing so it will go onto the Quick Disconnect Valve with just a little slack (NOTE: It is very important NOT to cut the tubing too short. If the tubing is cut too short and creates tension on the Quick Release Valve, the unit may leak. Additionally, leaving the tubing too long may prevent the unit from priming).
Push the tubing onto the barbs of the Quick Disconnect Valve, making sure to connect the tubing coming from the Inlet Pipe Assembly to the Inlet Barb and the tubing from the Outlet Pipe Assembly to the Outlet Barb. If these tubes are reversed, the filter will NOT operate correctly.
Secure the Flexible Tubing with two Flexible Tubing Clamps.
STEP 7 Prime the Filter
Lift the Lever on top of the Quick Disconnect Valve to prevent water from entering the filter. Remove the Inlet Pipe Cap on the Inlet Pipe Assembly.
Insert the Priming Funnel into the Inlet Pipe Assembly. Using a cup, pour water into the Priming Funnel until the tubing between the Inlet Pipe and the Quick Disconnect Valve is full of water.
Remove the Priming Funnel and replace the Inlet Pipe Cap securely. Make sure the Quick Disconnect Valve is fully seated in the blue motor housing, and then push the Lever down.
The canister should begin to fill with water and air should be forced out through the tubing. Allow two minutes for the filter and tubing to fill completely.
Plug in the power cord to operate the FilStar Canister Power Filter
Clean canister, rinse foam pads, and replace micron filtration pad once monthly. Replace Bio-Chem Zorb every 1-3 months, depending on fish load.
Introduction to mechanical, biological, and chemical filtration:
In an aquatic environment, organic particles (leftover food, excrement, dead algae etc.) are always produced, which if not removed, will result in a high bio-load that encourages the development of nitrate and unsightly algae. Also, as fish digest their food and as bacteria break down fish food and other organic matter, ammonia (which is toxic to fish) is set free into the water. The following types of filtration methods are employed to remove these effects and maintain a suitable environment.
Mechanical Filtration is the physical removal of particulate matter from the water. This is achieved by introducing a mechanical barrier in the water flow that traps particles of a certain size according to filter material used. A mechanical filter is only effective when it is cleaned regularly, otherwise, bacteria will settle in and start breaking down the collected dirt, thus setting nutrients free into the water as well as becoming a bio-filter resulting in increased nitrate levels.
Biological Filtration is the process by which aerobic (nitrifying) bacteria convert the toxic ammonia into nitrite, which is only slightly less toxic than ammonia. Another bacteria changes nitrite into the relatively harmless nitrate. This process is known as nitrification, and in nature, takes place in aquatic habitats and soils where ammonia and sufficient oxygen are present.
The nitrifying bacteria develop naturally in an aquatic environment and will colonize any suitable filter media. Once a biological filter media has been established, it should be disturbed as little as possible since the bacteria colony maintains its level of activity according to the bio-load present in the system.
Chemical Filtration removes toxic or unwanted chemicals as the water passes through a chemical media or resin. A number of recent advancements have brought us new products that are targeted at removing specific chemicals or excess nutrients from the water. If used correctly, these medias can be incorporated into the filtration to both improve water quality, and reduce the amount of maintenance and water changes needed to sustain a healthy aquarium. Most of these medias do have adverse side effects for aquarium pets. It is, however, important to carefully monitor the water chemistry and perform water changes as necessary.
Aquarium canister filters boost exceptional filtering capacity. However, did you know they are also extremely customizable? Learn how to customize your filter to remedy specific water quality concerns.
Whether you're setting up a larger aquarium or simply want to upgrade your existing filter, the versatile and reliable nature of a canister filter makes it a great choice. Use the following chart to determine which canister filter is right for you.
A canister filter is a sealed container filled with various filter media. The principle advantage of canister filters over power filters is their roomy media baskets which can be filled with a variety of filter media to create custom filtration.
Quiet, convenient canister filters are inconspicuously located under your aquarium. All the canister filters we offer are customizable, and can hold a large amount of media (mechanical, chemical, and biological) in varying combinations.
Please note: Return of electrical equipment to Drs. Foster & Smith for exchange or refund is limited to 60 days from the date of purchase. Beyond 60 days, please contact the manufacturer for repair or replacement as covered by the manufacturer's warranty.
Want to know if we drop the price on this item? SIGN UPfor an easy email alert!
What are Email Alerts? Learn here. You may end alerts at any time. | Manage alerts