Lifegard WOW LED Internal Filter Pump

Simplify aquarium product selection with this outstanding all-in-one device. Lifegard WOW LED Internal Filter Pump multitasks to provide aquarium water movement, filtration, aeration AND illumination. Innovative single cord unit dramatically reduces aquarium clutter while maintaining water quality essential for healthy inhabitants. Special, patented outlet diffuser creates wave-like effect to enhance aquarium water movement.

Brilliant, energy-efficient LED's (Light Emitting Diodes) boast versatile design for use inside or out of aquarium water. Included colored lenses make it a snap to add dramatic light effects. In-tank filter pump secures in place with included suction cup mounts for convenient installation. The Lifegard WOW LED Internal Filter Pump eliminates the need for multiple devices, making it a smart, space-saving choice for freshwater or saltwater aquariums up to 60 gallons. Great filtration choice for small aquariums, quarantine or hospital tanks as well as any temporary setup.

Includes: Airstone, air regulator (2), cartridge with BioBalls, airline tubing, flex sponge, sponge (Models 160 and 235 only), LED light with four colored lenses (blue, red green, yellow), and heater clip.

Please click on "More Information" for instructions.

Insert the suction cups into position and insert the filter chamber (Model 80) by simply rotating it. For Models 160 and 235, the filter with one sponge must be attached last. Insure that it is assembled in the right direction.

Insert the wavemaker by slightly adjusting the spring. Position the WOW vertically into position using the special adjusters and place the airstone in the best position for oxygenation. To obtain a wave effect, connect the aerator output hose to Input A thus eliminating the airstone.

A heater (sold separately) can be fastened to the filter using the supplied clip, which allows it to be easily detached.

For models with LED Mood Light, insert the LED into position by pressing hard or fastening it to side of tank using suction cup provided. Connect plug to electrical outlet.

Operating
Position the flow adjuster to obtain a jet of water that will best suit the tank size. To adjust amount of air flow simply rotate the air-flow regulator.

Maintenance
Important: Maintenance should be carried out regularly for an efficient filtering and oxygenating system. Disconnect plug before performing any maintenance.

To clean the filter
Detach each chamber by turning and easing it out. Wash the sponge under running water or replace if necessary. The filtering media in the cartridge need only be rinsed. To clean the impeller -it is necessary to first remove the suction cup base plate by adjusting the locking plate. Ease out aerator unit, which can be released by pushing the special projecting catch downwards. Then release the pump housing in the same way. Remove the impeller from its position taking care not to lose the bushings. Wash under running water to remove any deposits, or replace if necessary. Do not use any soap or detergents. Replace all parts in the reverse order keeping the oval front in the proper position on the pump.