Features and specifications
- Patent pending angled eccentric drive system & precision calibrated motor are designed for a ultra smooth efficient cutting performance
- Zinc alloy technology combines a lightweight ergonomic feel with heavy duty long lasting durability - unlike other clippers that are made with just plastic
- Patent pending vibration isolators are centered around the motor to help absorb vibration and noise resulting in a natural feel for all day grooming
- A specially designed clipper faceplate helps keep the hair out while still being able to access the drive lever for quick and easy maintenance
- 3 speeds provide the ultimate in versatility while grooming with convenient 1-handed operation
- Up to (Hi: 4,400 spm Medium: 3,600 spm Lo: 3,100 spm)
- A high-efficiency motor provides a cooler running experience
- Weighing in at 0.81lbs (12.9 oz) - it's our lightest clipper minimizing hand fatigue
- Uses all A5 detachable blades
- 12 ft power cord with space saving extension that allows for more room in your power strip
Taking Care of Your Clipper
Make sure clipper is turned off and unplugged from electrical outlet before removing, replacing or cleaning any part.
Removing Blade Assembly from the Clipper
Push locking button in and hold. Push blade assembly upwards (about 45% from start position). Blade assembly can now be removed from clipper by pulling forward and upwards.
When pushing the blade assembly back into the clipper, it must be inserted with the smooth side of the blade facing upwards. If the blade is not positioned with the correct side facing upwards, damage to the clipper or injury may result.
Maintenance
To clean the blades, plug clipper into electrical outlet and turn on. In a shallow pan, immerse blade teeth into Oster Blade Wash cleaning solution. CAUTION: DO NOT IMMERSE THE CLIPPER.
Remove blade from cleaning solution and while holding clipper blade end down, wipe the blades with a dry, clean cloth. If, after cleaning, you find that the blades still do not cut properly, it is possible that a few fine pieces of hair are still trapped between the blades. If this occurs, remove the blade. Without loosening the tension springs screws, slide the upper blade to one side but not completely out from under the tension spring. Wipe the surface between the blades clean with a dry cloth.
Place a drop of oil on the mating surfaces and in the tension spring guide slot. Slide upper blade to the other side and repeat the process. Slide the upper blade back into position and reassemble the clipper. With the clipper running, lubricate the blades with a light coat of Oster Kool-Lube lubricant or a drop or two of Oster Premium Lubricating Oil.
Sharpening
Oster cutting blades are of individual hollow-ground design, hardened to extend cutting life. As with any cutting tool, the cutting edges will become dull after extensive use. If sharpening is necessary, send blades to an Oster authorized service center.
Storing Your Clipper
Store your clipper in a clean, dry space. Be careful not to tangle the cord while storing the clipper. Do not wrap cord around the clipper when storing. This can damage the cord insulation.
Blade Care, Cleaning and Lubricating
Blades should be oiled regularly to reduce heat and maintain sharpness. Before removing the blade, be sure it has cooled down. With clipper in off position, apply 1-2 drops of Oster Clipper and Blade Lube oil on the blade. Wipe excess oil with a dry, soft cloth.
Clean the excess hair from your blades by using the cleaning brush.
| 
 "Oster A6 Pet Clipper")
