Andis EasyClip Clipper and Cordless Trimmer Combo

Ultra-convenient duo of an Andis Easy Clip Clipper and an Andis cordless trimmer helps you keep your dog looking stunning every day! This 12-piece kit is designed for medium-duty all-around dog grooming sessions, as well as fast, simple touchups and trimming around your dog's face and paws.

The quiet running, 7,200 SPM EasyClip Multi-Trim Clipper features an adjustable blade (#10, #15, and #30) and a 6-ft long cord. The cordless Andis Trimmer is lightweight, easy to hold, and extremely easy to use during dog grooming. Trimmer requires 2 AA batteries (not included). Both the Clipper and Trimmer are for all dogs and all coat types.

Kit includes: 7" long clipper, 6.5" long trimmer, 6 attachment combs (1/8", 1/4", 3/8", 1/2", 3/4", 1"), protective blade guard, lubricating blade oil, pet trimming tips DVD, and soft carrying case. Also includes comprehensive use and care instructions for clipper and trimmer.

Shop all Dog Grooming Supplies.

Please click on "More Information" for operating instructions, product maintenance, and additional product details.

USER MAINTENANCE
The internal mechanism of your clipper has been permanently lubricated at the factory. Other than the recommended maintenance described in this manual, no other maintenance should be performed, except by Andis Company or an Andis Authorized Repair Service Station.

POWER ADJUSTMENT
Your Andis Clipper has been adjusted to line voltage at the factory. However, because of voltage variations, you may need to adjust the power setting for your area. If the power adjustment is off, you will usually notice a "clatter" when the clipper is on or introduced into the hair (it is normal for your clipper to "clatter" for an instant when initially turned on).

TO ADJUST YOUR CLIPPER:

1. Oil the blades.
2. Locate the power screw on the lower part of the clipper housing opposite the switch.
3. Turn your clipper on.
4. Using a standard screwdriver that fits the slot, turn the power screw clockwise until the clipper clatters continuously. Then turn the screw counterclockwise carefully until the clatter ceases.
5. Your clipper is now adjusted to its optimal power setting.

CARE AND SERVICING OF YOUR ANDIS CLIPPER BLADES
Oil your clipper blades before, during, and after each use. If your clipper blades leave streaks or slow down, it's a sure sign blades need oil. Hold the clipper with blades pointed at and oriented parallel to your floor to prevent oil from getting into the motor. Place a few drops of Andis Clipper Blade Oil on the front and side of the cutter blades. Wipe excess oil off blades with a soft dry cloth. While spray lubricants contain insufficient oil for good lubrication, they are an excellent clipper coolant. Always replace broken or nicked blades to prevent injury. You can clean the excess hair from your blades by using a small brush or worn-out toothbrush. To clean the blades, we suggest immersing the blades only in a shallow pan of Andis Clipper Blade Oil, while the clipper is running. Any excess hair and dirt that has accumulated between the blades should come out. After cleaning, turn your clipper off and dry blades with a dry cloth and start clipping again. Before storing the clipper, spread one or two drops of oil over the blades to prevent the blades from rusting.

REPLACEMENT (REMOVAL) OF BLADE SET
To remove the blades, first unplug the clipper from the electrical outlet. Turn the clipper upside down, so that the blade teeth are pointing down. You may wish to place the clipper on a flat surface to do this. Unscrew the screws on the blades. Remove the blades. To replace the blades, put the smaller, upper blade back into position. Line up the screw holes in the bottom blade with the 2 holes in the blade bracket, and replace the screws. Do not tighten down the screws completely. Turn clipper over and align lower blade so teeth on both blades are parallel, but with lower blade's teeth slightly above the upper blade teeth. Failure to do this may result in skin injuries while cutting your dog's hair.

ATTACHING THE CLIPPER COMBS
Attachment comb sizes may vary in each kit. The clipper comb blade attachments mount easily. Just snap them on and snap them off. You can always set the blades for a coarser cut by attaching any of the snap-on blade attachments made for your Andis Clipper. To use a blade attachment, slip the cutter blade teeth into blade attachment. Snap the blade attachment down. These attachments guide hair into the clipper blades and give you precise control of hair lengths. The length of trim is indicated on the blade attachment: 1/16", 1/8", 1/4" 3/8", 1/2", 3/4", 7/8" and 1". Use the chart below to find approximate lengths of cut. Different blade angles in relation to the skin, thickness, and texture of the hair will vary the cutting length.

CLIPPER BLADE ADJUSTMENT Your Andis Adjustable Clipper Blade set adjusts from coarse to fine cuts easily. Simply move the adjustment lever with your thumb. In the upright position, blades are set for the finest (shortest) cuts.

Clipping Guide

Trimmer

OPERATING INSTRUCTIONS
Your cordless trimmer uses 2 AA batteries (not included). Insert batteries as shown on inside of trimmer. DO NOT MIX old and new batteries. DO NOT MIX alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium) batteries. Dispose of or recycle batteries properly.

USER MAINTENANCE
Blades: When trimming is complete, slide on/off switch to off position and remove the trimming comb (if it is being used). Lightly brush out blades with a blade cleaning brush. For best results, place a drop of Andis clipper oil on the blade when necessary. Motor bearings are permanently lubricated - do not attempt to oil them. Handle blades carefully; do not bump them or use them to cut dirty or abrasive material. Do not use trimmer in or near water, as damage to batteries and product may occur. Other than the recommended maintenance described here, no other maintenance should be performed, except by Andis Company or an Andis Authorized Service Station.