Flexi Wall Mounted Gates

Enclose large openings, even irregular shapes, while still allowing you and your smaller pets convenient access. Tubular steel panels feature screw-tight tension hinges and stretch to close openings 76" wide. This gate features two swing-open access doors: a large door for you, and a small door for your cat or small dog. Walk-through access door swings open in one direction and secures with an adult-operated spring-loaded latch. Small pet access door swings open in both directions and closes with a spring-tension pin. Screw-mount hardware affords simple, fast and secure set-up. Each panel features slats 2-3/4" wide. Add up to three additional 24-1/2" wide x 30" high Extension Panels to cover openings up to 12.5 ft wide (when configured in a straight line). Extra Tall version secures equally large openings but stands 38" tall to safely contain the largest of dog breeds. Available in Beige only.

Please click on "More Information" for installation and cleaning instructions.

1. Measure the opening you would like to secure.
2. If necessary, add individual panels to create a gate of sufficient length.
1. First, unscrew the Screw-tight Tension Hinge on the end Panel.
2. Fit the Screw-tight Tension Hinge on each of the Extensions (sold separately) and the Gate.
3. Tighten each Hinge together via the Screw-tight Pin.
3. Place the Gate in the desired opening.
4. With a Pencil, mark the approximate height of each end Panel's Gate Mounting Tabs.
5. Remove the Gate from the opening.
6. Hold one Mounting Plate against the previously made pencil mark.
7. With a Pencil, mark each of the three Screw Holes.
8. Repeat Steps #6 and 7 for the second Mounting Plate.
9. With a Hand or Electric Drill, drill a small pilot hole for each of the six screw locations.
10. Using a Phillips Screwdriver and the included Metal Screws, affix each Mounting Plate to each side of the desired opening.
11. Once secure, reposition the Gate in the opening.
12. Slightly lift each Gate end to align the Plastic Tabs on the end Panel with the Notch on the Mounting Plate.
13. Once aligned, firmly press downward on the Gate to secure the end Panel to the Mounting Plate.

Cleaning Your Flexi-Gate
If necessary, hand-wash your gate with soft, wet cloth and a mild soap. Ensure the gate is thoroughly rinsed and towel or air dried before returning to your pet's environment.

Flexi-Gate Product Specifications
Made of three tubular steel panels, each secured together with plastic screw-tight tension hinges. Each panel features slats 2-1/4" wide and combines to fit openings up to 76" wide. One panel also features both a swing-open walk-through door and a swing-open small pet door. Walk-through locks via an adult-operated spring-operated latch and swings open in one direction. Small pet door secures with a tension pin and swings either in or out. Screw-mount hardware affords simple, fast, and secure set-up. Available Extension easily adds an additional 24-1/2" and can be combined to fit openings up to 12.5' wide.

Parts List
2 - Metal Gate Panels (24-1/2" wide x 31" high)
1 - Metal Gate Panel with 16-1/2" wide Hinged Door (24-1/2" wide x 31" high Panel)
2 - Plastic Mounting Plates
5 - Metal Screws (3/4" long)