Make your dog's excessive nuisance barking a thing of the past with our most versatile bark collar. Three correction modes and up to ten levels of stimulation really get the attention of stubborn barkers. The No-Bark quickly distracts a dog's urge to bark; most dogs show a marked reduction within the first couple days of wearing the collar. The collar's intelligent design shortens the training phase with correction modes tailor-made to fit your dog's temperament. Indicator lets you know when collar is on or off. For dogs 8 lbs and over.
Use the Temperament Learning mode (indicated by green light) to track the number of corrections needed to reduce your dog's nuisance barks. As your dog barks, the correction level gets more intense until he stops. This correction level then becomes the startup level the next time he barks, which allows for faster training.
With Progressive Correction (indicated by blue/green light), the collar starts at the lowest level and progresses to the next level each time your dog barks within 30 seconds of the previous bark.
User-Selected Correction mode (indicated by blue light) allows the user to preset the correction level the dog will receive each time he barks.
Lifetime limited warranty.
Note: Includes collar, charging adaptor, and training guide.
Please click on "More Information" for instructions.
How the No Bark 10R Works|
A patented sensor system provides the most reliable bark detection available. The unit delivers a static correction via vocal cords AND the sound of the bark.
Three selectable modes allow the user to choose how corrections are delivered:
Mode Switch: Adjusts the operating mode and level of correction your dog receives when barking. This switch is also used to turn the No Bark 10R on and off.
Sound-Activated Sensor: Detects your dog's bark. The sensor is covered by a user-replaceable Gore-Tex cover for additional water resistance.
Contact Points: Deliver the safe correction.
Vibration Sensor Probe: Detects the vibrations of your dog's barking. Important: The vibration sensor probe is not adjustable.
LCD Display: Displays the current mode of operation based on the color of its backlight and the numeric indicator. Displays the condition of the battery (Full, OK, Low).
Charge Port: Receptacle for the charging adaptor to recharge the battery.
Charging Adaptor: Plugs into a standard wall receptacle for recharging the collar.
Modes of Operation
No Bark 10R Operating Modes Summary
The No Bark 10R has a single push-button that allows the user to turn the unit on and off, display the current operating mode, and change the operating mode. The following table describes how to perform the different tasks.
Note: When using the No Bark 10R, always start training at the lowest level of correction. Watch how our dog reacts, and if necessary, progress to the next correction level if using the User-Selected mode.
Note: When the operating mode is changed, the correction level is automatically reset to Level 1.
Push Button Functions
To Fit the No Bark 10R
To ensure a proper fit, please follow these steps:
Average battery life is a 3 to 5 months, depending on how often your dog barks. However, due to greater use during your dog's training, your first battery charge may not last as long. To conserve battery life, turn the No Bark 10R off when not in use.
Follow these steps to recharge the battery:
Important: Do not leave your dog alone the first few times he receives a correction.
Place the No Bark 10R properly on your dog and wait nearby until he barks. Most dogs will understand quickly that the No Bark 10R is disrupting their urge to bark and will relax and stop barking. Because the correction may be surprising or startling at first, some dogs may bark more at the initial correction. On rare occasions, a dog may get into a bark-correction-bark-correction cycle. If this happens, reassure your dog with calm soothing tones. As your dog relaxes, he will understand that if he becomes quiet, he will not receive anymore corrections. The small minority of dogs that have this reaction will usually only have it the first time they wear the No Bark 10R.
You should notice a reduction in your dog's barking within the first couple of days that he wears the No Bark 10R. At this point, it is important to remember the learning process is still not complete. Dogs will "test" the new learning experience and will increase their attempts to bark. This usually occurs during the second week a dog wears the No Bark 10R. If this does occur, remain consistent and do not alter your use of the No Bark 10R. You must place the No Bark 10R on your dog in every situation when you expect him to be quiet. If your dog is not wearing the No Bark 10R, he may resume barking and his learning would suffer a setback.
|Q.||Will my dog stop barking completely?|
|A.||The No Bark 10R effectively and humanely stops barking when it is worn. It should only be worn during periods of unwanted barking.
|Q.||Is the No Bark 10R safe and humane?|
|A.||Yes. The No Bark 10R is designed to get your dog's attention, not to punish him. However, the initial correction may startle your dog.
|Q.||Will the No Bark 10R work for my dog?|
|A.||The No Bark 10R is safe and effective for all breeds and sizes of dogs, though it may be too large for dogs under 8 pounds to wear comfortably.
|Q.||Is it possible for my dog to learn not to bark only when the No Bark 10R is on?|
|A.||Yes. This is best accomplished by placing the No Bark 10R on your dog only in situations where you never want him to bark, and never placing the No Bark 10R on your dog in situations where you find it acceptable for him to bark.
|Q.||I have more than one dog, but only one dog with a barking problem. Will it cause problems between the dogs if I keep them together?|
|A.||It should not be a problem, especially if you follow the procedures described in this guide.
|Q.||The No Bark 10R LCD backlight is not flashing.|
|A.||Make sure the No Bark 10R unit is turned on. Recharge the No Bark 10R. If the No Bark 10R continues to fail to indicate proper operation, contact the Customer Care Center at 1-800-732-0144.
|Q.||Will another dog's bark set off the No Bark 10R?|
|Q.||Can I leave the No Bark 10R on my dog all the time?|
|A.||No. Never leave the No Bark 10R on for more than 12 consecutive hours.
|Q.||Can I attach a leash to the No Bark 10R?|
|A.|| No. this can result in pulling the contact points too tightly against your dog's neck. Attach a leash to a separate, non-metallic collar; making sure the extra collar does not put pressure on the contact points.
|Q.||My dog keeps barking (does not respond to the correction).|
|A.|| Tighten the No Bark 10R and/or trim your dog's hair where the contact points touch his neck to ensure good skin contact. Recharge the No Bark 10R. If your dog still does not respond, contact the Customer Care Center at 1-800-732-0144.