Door-in-Door pet gate secures dogs but allows cats to pass in and out
Gate mounts by pressure once wall-mount cups are installed
Durable, all-steel construction
Tall, 41"-gate corrals large, active pets, while 7" x 10" small door allows cats to pass back and forth. One-way 17-3/4" x 41" high door with locking lift-up handle, rounded corners, and tough, all-steel construction guarantee safety and dependability. Adjustable gate attaches to wall-mounted cups for maximum stability. (The gate operates like a pressure mounted gate once the mounting cup is attached to the wall.) 2.25" bar spacing. A 6" x 41" high extension is included for openings up to 40" wide. Please specify White, Platinum, or Black. Gate is 29"-40" wide x 41" high; Extra Extensions sold separately.
Please click on "More Information" for Pet Gate features and instructions.
Small pet door for feline friends or other small pets
Tall 41" height helps prevent larger pets from jumping over
Sturdy, all-metal construction provides added strength and durability
Convenient, one-touch walk-through gate door
Expands 29"-34" wide: Includes 6" extension kit
Easy to install and remove
Perfect as a room divider or for stairways
Pressure mount gate doesn't have to be attached to door frame - can be mounted wall to wall
This gate is designed for large and small pets and may be used in opening from 29" to 34" wide. Includes 6" extension to make gate fit openings up to 40" wide.
Using the gate: To open: Slide the safety catch over and lift the handle to swing the gate open. To close: Swing the gate closed firmly and press the handle down until the safety catch clicks into place.
Using the small pet door: To open, pull knob out and swing the door open. To close, pull the knob out and shut the door. Once the locking pin is aligned with the hole in the gate frame, release the knob.
Threaded Spindle Rods (4)
Hand Wheels (4)
Wall Cups (4)
Attachment Screws (4)
Screw each hand wheel on to a threaded spindle rod with the hollow side of the hand wheel facing away from the white pad on the end of the spindle.
Insert the assembled threaded spindle rods and hand wheels into the appropriate holes in the plastic end plugs at the top and bottom tube ends of the gate.
Position the gate in the required opening. It may be necessary to squeeze together the top part of the frame.
Position the gate so that the gate opens to the side the pet will be.
Place a wall cup over each spindle rod. Turn the bottom hand wheels so as to extend the adjusting spindles until the base is held firmly and the gaps on either side of the gate are as equal as possible. Then turn the top hand wheels to extend those adjusting spindles to reduce the gap between the handle and the side rail. The gate is correctly positioned when the gap between the handle and the side rail is about 1/16".
IMPORTANT: It is essential that the gate be as nearly vertical as possible and that it be closed and locked at the top and bottom before marking the position of the wall cups.
Mark the position of the wall cups on the wall with a pencil and remove the gate. NOTE: If installing the gate in a doorway, ensure that the cups to not interfere with the closing of the door.
Using the screws provided, screw the wall cups in their marked positions. The screws provided are suitable for a minimum wood thickness of 3/4".
Replace the gate inside the attached wall cups. Turn the bottom hand wheels until the base is held firmly, again ensuring that the gaps on either side of the gate are as nearly equal as possible. Then turn the top hand wheels towards the gate frame to reduce the gap between the handle and the side rail until it is about 1/16". So not over-tighten as that may prevent the locking mechanism from functioning.
Instructions for 6" and 24" gate extensions:
Do not use more than two extensions per gate.
Assemble the gate using the assembly instructions above up to step 5.
Choose the side of the gate to be extended and remove the top and bottom adjusting spindles and hand wheels.
Insert the top and bottom spindles of the extension into the top and bottom of the gate. Attach the adjusting spindles and hand wheels you removed from the gate into the side of the extension nearest the wall.
Finish assembling the gate per steps 5 and 6, above.
As every pet owner knows, certain times and situations require that you safely contain your pet. Choosing the right product for your pet and your needs helps ensure your pet's safety and well-being when contained.
EZ-open foot latch lets you open and pass
through gate even with your hands full Top push/pull lever also allows easy, single-hand operation Color-coded locking indicator shows whether gate has latched properly 32"-high, pressure-mount gate installs easily, fits 30"-34" ...
Attractive gate designed for versatile, non-permanent mounting Installs
& removes quickly for convenient use anywhere you need it Choose from sleek, rugged steel or beechwood/steel Ideal for high-traffic areas! The AutoLock Pressure Gate features a durable, superior latch system. ...
Quality gate offers tool-free assembly and configuration Easily
customized by adding or eliminating panels to fit any open area Folds up flat for easy storage or transport Specially designed pins are the secret to adding and removing panels on ...
Easy one-hand operation Heavy duty steel construction Features
a walk-through doorway Perfect for heavily traveled doorways and room openings. One-of-a-kind handle design integrates Pressure-Plus Technology which forces additional outward pressure on the door opening to maximize gate stability after ...
Patented freestanding pet gate system with lockable walk-thru
door Adjustable side panels allows versatile doorway or hallway placement Rubber feet protect floor surfaces and prevent pet gate from sliding Versatile, easy placement pet gate fits doorway or hallway openings ...