Two-part system converts from bicycle attachment to baton leash in seconds. Universal bicycle mount remains secured while quick-release disconnect allows convenient detachment. Internal tension spring absorbs jolts and jerks for a smoother ride and better control. Allen wrench included for easy mounting. 3/4" diameter with 1" diameter padded handle x 26". Works best with a padded harness (sold separately).
Please click on "More Information" for installation and operating instructions.
Assembly is very easy and takes no more than 5 minutes. Use included, Allen wrench to tighten the screws.
After opening the package, separate the two parts of the fixing jaw.
Position the two parts of the fixing jaw on the center (bicycle seat/saddle) pole, slightly tightening the screws with the connectors. Allow the jaw to stay in position but still loose enough to adjust.
For non-standard bicycle seat/saddle pole diameter (or simply to avoid scratches) wrap the included rubber/foam strip around the pole before positioning the jaw.
Attach the tubular bar to bicycle mount.
Orient the tubular bar (baton) backwards approximately 20°.
Tighten the screws firmly.
Make sure the quick-lock is completely attached.
Adjusting Walky Dog:
Adjust the cord (lanyard) length by regulating the number of springs composing the internal shock-absorbing system. Reduce the number of springs to lengthen cord or to reduce tension strength for smaller size dogs. Access the internal spring by unscrewing the front bullet terminal and extracting the cord. Undo the knot holding the springs and remove one or two springs and re-tie knot before inserting it in the tubular bar.
General Adjustment Suggestions:
3 springs for adult dogs such as Alaskan Malamutes, Dobermans, and similar dogs.
2 springs for adult dogs such as Siberian Husky, Golden Retriever, Dalmatians, German Shepherds, and similar dogs.
1 spring for small sized dogs.
Troubleshooting and Maintenance:
Tighten screws on the universal mounting jaw for secure attachment.
Adjust the number of internal springs until the desired cord length is achieved.
If cord/lanyard begins to fray, replace with similar shape/size cord with same diameter.
After use in dust or wet conditions, check the internal springs for rust. To help prevent rusting, spray springs periodically with silicone sprays.
Make sure the Front Bullet is tightly secured onto tubular bar.
Wipe entire product periodically with a damp rag (with a mild detergent) to remove dust and grease.
Important Note and Legal Disclaimer:
Children younger than 15 years of age and weighing less than 88 lbs should not use Walky Dog. The use of Walky Dog by children is strongly recommended under strict parental supervision. Riders carrying children on their bike should not use Walky Dog. Walky Dog is specifically designed for the professional endurance training of competition dogs. Check local Highway codes before using product on public roads.
Safely designed bike accessory lets you bring your
dog along Keeps your dog by your side while out of harm's way Easy to install on bicycle's real axle Who says you can't bring your dog along when you go ...