Floor Grates

Optional vinyl-coated floor grate provides the practicality of removing the pan without disturbing your pet. Keeps pet two inches above waste, water or spills.

Please click on "More Information" for size chart.

Please note: When combining these floor grates with divider panels, we recommend using divider panels 712, 715, or 716.

Fold & Carry Cage Floor Grate Installation:

1. Unhook front door panel of crate and place flat on floor. Lift floor grate into crate through front door with hooks down.	2. Hook floor grate over double-hinged wire (where crate base and side connect) on left side.
3. Unhook back door panel and place flat on floor. Fold crate slightly to right to allow other side of floor grate to hook over corresponding double-hinged wire on right side.	4. Fold crate back to original position and attach front and back panels, making sure to hook them in place on sides and top.

Note: You cannot fold down crate with grate inside.

Square Back Cage Floor Grate Installation:

1. Remove top panel of square back cage and place to the side. Lift floor grate inside cage with hooks down.	2. Place hooks over first set of cross wires above crate pan.
3. Lower other side of grate into position, and hook onto corresponding crosswire.	4. Replace cage top panel, making sure end panels are hooked in place.

To Clean: Wash with soap and water or any general household cleaner. Do not use anything that is abrasive. Dry thoroughly to prevent rusting.