Pet Screen Door

Allows pets to go outside through your existing screen door or window. One of our largest, this door accommodates pets up to 30 lbs. and installs directly onto metal or fiber screens with household tools. Magnets ensure flaps close completely, and panel locks keep pets inside when you don't want them out. Rustproof frame with fiber screen. 8" x 10" opening.

This durable pet screen door is suitable for pets under 30 lbs. It's made with a rustproof frame and can be installed on metal or fiber screen doors.

• Easy to install
• Panel has locks to keep pets from going out
• Ceramic magnets ensure flap always closes completely behind your pet
• Opening is 8" x 10"
• Easy-to-follow installation manual
• Can also be installed in screened windows between the kitchen and patio as a food and drink pass-through

Opening size: 8" x 10"

Tools Needed for installation:
Hobby knife, tape measure, mallet

Please click on "More Information" for installation instructions.

1. Remove your screen door or window screen and place it on a hard, flat surface with the outside of the screen facing up.

2. Separate the two parts of your Pet Screen Door, making sure the locks are in the unlocked position.

3. The center of the Pet Screen Door should be at your pet's shoulder height. Place the frame (with grooves up) under your screen door or window screen in this location.

4. Is your screen door metal or fiber? If it is metal, cut around the entire edge of "A". If it is fiber, cut around "B". Using the grooves as a guide, cut with a small, sharp knife. Hold the Pet Screen Door frame firmly so it doesn't move during cutting. Remove the cut-out portion of the screen.

5. Place the front section of the outer frame into position on the back section, "trapping" the cut edge of the screen. Using a mallet, tap the two frame sections together until they are firmly joined all around. Replace your screen door or window screen. Urge your pet through the door using a treat.